---
title: "Metal can manufacturers (NAICS 332431, SIC 3411): Industry Risk Guide"
description: "NAICS 332431 · SIC 3411. Can plants turn aluminum and tinplate coil into beverage, food and aerosol containers on very fast lines that run around the…"
url: https://www.urbanstat.com/industry-risk-guides/metal-can-manufacturers-naics-332431/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Metal can manufacturers NAICS 332431 · SIC 3411

Can plants turn aluminum and tinplate coil into beverage, food and aerosol containers on very fast lines that run around the clock, and related plants form steel drums, pails and kegs. Solvent-based coatings cured in gas ovens, towering pallets of empty containers and food-contact quality demands make fire and product claims the main concerns.

[**NAICS 332431** Metal Can Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332431) · [**SIC 3411** Metal Cans](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3411) · [**NAICS 332439** Other Metal Container Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332439)

Manufacturing · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption High](#line-bi)
3. [Premises liability Low](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Property.** Flammable lacquers and inks, gas-fired ovens, oxidizers and lubricant mist on the lines, plus a warehouse stacked to the roof.

Loss drivers

## Where losses come from.

1. Fires and explosions in coating, printing and curing ovens and their exhaust systems
2. Warehouse fires in high-stacked pallets of empty cans with plastic and cardboard packaging
3. Leaking, contaminated or badly coated containers that spoil or release customers' filled product

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Metal can manufacturers, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Beverages moving from plastic and glass to aluminum have pushed plants to add lines and run harder, leaving less spare capacity after a loss.
- Bisphenol-free internal coatings and water-based systems change curing and compatibility risks, so every recipe change needs fresh pack testing.
- Lighter-gauge aluminum and faster lines cut material costs but leave less margin for seam and pressure defects in filled cans.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Flammable lacquers and inks, gas-fired ovens, oxidizers and lubricant mist on the lines, plus a warehouse stacked to the roof.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Solvent-based coatings stored and mixed near the lines
- Oven and oxidizer ducts coated with condensed residues
- Pallet stacks taller than the sprinkler design allows

**Controls that matter**

- Solvent concentration monitoring and interlocked oven ventilation
- Scheduled cleaning of ovens, ducts and mist collectors
- Warehouse sprinklers designed for the actual pallet height and packaging

### Business interruption: High (4 of 5)

Lines are dedicated, fast and built to order; rebuilding one takes many months while beverage customers need cans every day.

Covers: How long and how costly a shutdown is.

**Watch for**

- Plant dedicated to one or two fillers
- Peak summer demand with little spare industry capacity
- Single supplier of coil or ends

**Controls that matter**

- Qualified can sizes and labels at a sister plant
- Buffer stock in a separate building
- Critical spares for bodymakers, decorators and ovens

### Premises liability: Low (1 of 5)

No public on site; only carriers, coil suppliers and contractors.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Truck drivers on foot in busy dock areas

**Controls that matter**

- Driver waiting areas and marked pedestrian routes

### Products and completed work: High (4 of 5)

Cans hold food, drink and pressurized aerosols; seam, coating or contamination defects lead to recalls charged back by the filler.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Aerosol cans, pressurized kegs or drums rated for hazardous goods
- Changes of internal coating chemistry without customer validation
- Contracts making the plant liable for filled product and recall

**Controls that matter**

- Automatic leak, vision and coating coverage testing on each line
- Pallet-level traceability to coil, coating batch and shift
- Recall plan and contractual caps agreed with each filler

### Workers’ injury: Elevated (3 of 5)

Automation keeps hands away most of the time; injuries come from jams, sharp edges, noise, coil handling and lift trucks.

Covers: Injuries and illness to employees.

**Watch for**

- Clearing jams without stopping the machine
- Manual changeovers on older seamers and presses
- Solvent exposure in coating rooms

**Controls that matter**

- Interlocked guards and lockout for jam clearing
- Cut-resistant gloves for scrap and coil handling
- Ventilated coating rooms with exposure monitoring

### Commercial auto: Moderate (2 of 5)

Cans travel by contract hauler; own vehicles are few.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Shuttle trucks running between plant and outside warehouse

**Controls that matter**

- Driver checks and maintenance on any owned shuttle fleet

### Crime and theft: Moderate (2 of 5)

Aluminum coil and baled scrap have a ready market; finished cans do not.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Scrap bales stored outdoors and sold without weight checks

**Controls that matter**

- Fenced scrap area with weighbridge reconciliation

### Inland marine and equipment: Moderate (2 of 5)

Large volumes of light, easily crushed or contaminated product in transit and in outside warehouses.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Stock at third-party warehouses not declared
- Customers' printing plates or tooling held on site

**Controls that matter**

- Values reported for each storage location
- Clean, enclosed trailers and sealed loads

### Environmental: Elevated (3 of 5)

Coating solvents, wash-line chemicals, oily wastewater and lubricants need abatement and treatment.

Covers: Pollution on or from the site or the work.

**Watch for**

- Oxidizer downtime with lines still running
- Wash water carrying dissolved metals and fluorides
- Bulk solvent tanks without containment

**Controls that matter**

- Thermal oxidizers interlocked to the coating lines
- On-site wastewater treatment with discharge testing
- Diked solvent and lubricant storage

### Cyber and data: Elevated (3 of 5)

Fast lines run on networked controllers, vision systems and scheduling tied to fillers' orders; ransomware stops output that customers need daily.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Line controllers reachable from the office network or by vendor remote access
- Customers' artwork and orders exchanged through shared portals

**Controls that matter**

- Production network segmented, with offline backups of controller programs
- Multi-factor access for vendors and customer portals

### Professional liability: Moderate (2 of 5)

Plants advise fillers on liner choice and run pack tests; a wrong compatibility call shows up as corroded cans across a product run.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Liner and coating recommendations made without documented pack testing

**Controls that matter**

- Written compatibility test results signed off by the filler

### Umbrella and excess: High (4 of 5)

A seam defect in low-acid food cans or bursting aerosol cans can injure many consumers across a whole production run.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Low-acid food, aerosol or hazardous-goods drum production

**Controls that matter**

- Limits set by the most severe container type and largest customer

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Large single-story steel-framed plants on slab, often decades old, with light metal roofs, attached high-bay warehouses, and ovens and oxidizers venting through the roof.
- **Occupancy**: Coil cutting, cupping and drawing with lubricant mist, solvent-based coatings and inks cured in gas-fired ovens, and finished containers stacked high on wood pallets with plastic and paperboard.
- **Protection**: Sprinklers designed for the warehouse storage height, oven and oxidizer safety interlocks, solvent vapor monitoring, mist collection on bodymakers, and fire detection in exhaust ducts.
- **Exposure**: Plants often sit beside or within fillers' and brewers' sites in industrial parks, so one fire or windstorm can stop supplier and customer together.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What containers are made, and what share goes to beverage, food, aerosol and industrial customers?
- What share of output goes to the largest few customers, and are there sister plants?
- How many ovens, oxidizers and coating lines run, and how old are their safety controls?
- What do supply contracts say about recall costs and losses of customers' filled product?
- What caused recent fires, line stoppages or customer claims, and what changed afterwards?

### Documents to request

- Loss runs with oven fires and customer claims identified
- Sprinkler design basis for the finished goods warehouse
- Supply contracts with the largest fillers
- Oven and oxidizer safety inspection reports
- Recall and traceability procedure

### On site: lines and products

- Which lines are running today, and what containers and metals are on them?
- How are drums, pails and kegs leak or pressure tested before shipping?
- How is lubricant mist from bodymakers and presses collected?

### On site: coating and ovens

- Are coatings and inks solvent-based or water-based, and where are they stored?
- What monitors solvent concentration and airflow in each oven?
- How often are ovens, exhaust ducts and oxidizers cleaned and inspected?

### On site: warehouse

- How high are pallets stacked, and what packaging separates the layers?
- Was the sprinkler system designed for that storage arrangement?
- How much finished stock is held off site?

### On site: quality and people

- How are internal coating coverage and seam dimensions checked during each shift?
- How are jams cleared, and is lockout enforced?
- Can a finished pallet be traced to its coil, coating batch and shift?

### Refer or decline if you find

- Oven safety interlocks bypassed or untested
- Residue-coated exhaust ducts with no cleaning record
- Warehouse storage beyond sprinkler design height
- No traceability from pallet to coating batch

Location

## How UrbanStat data helps.

The warehouse is a wide, light-roofed building; one breach lets rain onto cans that must then be scrapped as contaminated. Plants sit beside fillers in industrial parks, concentrating interruption exposure.

Tornado · Wind · Hail · Flood · Hurricane

- Wind, tornado and hail scores at the address inform roof terms for the warehouse, where rain on finished cans means the whole stock is scrapped.
- Street-by-street exposure views show accumulations where a can plant and the fillers it supplies share one industrial park, with alerts when totals pass a threshold.
- Parcel and permit data show building age and recent warehouse or oven permits, a prompt to confirm that sprinklers match today's storage.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Tornado · Wind · Hail · Flood

Public loss data · NAICS 332431

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**1.9** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Metal can manufacturing

**1.9**

All private industry

**2.3**

0.4 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Metal can manufacturing (NAICS 332431). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**46** fatal work injuries in 2024, most often from contact with objects and equipment (13).

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Fabricated Metal Product Manufacturing (NAICS 332), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**25** citations from 12 inspections; 44% were classed serious, willful or repeat.

- 1910.219 Mechanical power-transmission apparatus **5**
- 1910.147 The control of hazardous energy (lockout/tagout) **3**
- 1910.120 Hazardous waste operations and emergency response **3**
- 1910.165 Employee alarm systems **1**
- 1910.212 General requirements for all machines **1**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Metal Can Manufacturing (NAICS 332431). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**101** facilities reported toxic chemical releases totaling **7.5 million pounds** on and off site.

- Certain glycol ethers **4.2M**
- N-butyl alcohol **2.6M**
- Cyclohexane **311,971**

Chemicals released in the largest amounts, in pounds. 67 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Metal Can Manufacturing (NAICS 332431). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Product recall**: Fillers charge back the cost of pulling filled product when a coating or seam defect is traced to the can.
- **Equipment breakdown**: A failed bodymaker drive, decorator or oven burner stops a high-speed line for weeks without any fire.
- **Contingent business interruption**: A single coil or end supplier, or one large filler, can stop sales if their plant is damaged.
- **Site pollution liability**: Solvent tanks, coating wastes and wash water carrying dissolved metals can contaminate soil and drains over long operation.

## NAICS and SIC codes for metal can manufacturers

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [332431](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332431) | Metal Can Manufacturing |
| NAICS 2022 | [332439](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332439) | Other Metal Container Manufacturing |
| SIC 1987, primary | [3411](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3411) | Metal Cans |
| SIC 1987 | [3412](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3412) | Metal Shipping Barrels, Drums, Kegs, and Pails |

**Related business types**

- [Glass container and glassware manufacturers NAICS 327213](https://www.urbanstat.com/industry-risk-guides/glass-container-and-glassware-manufacturers-naics-327213/)
- [Metal stamping and fabricating shops NAICS 332119](https://www.urbanstat.com/industry-risk-guides/metal-stamping-and-fabricating-shops-naics-332119/)
- [Soft drink bottlers NAICS 312111](https://www.urbanstat.com/industry-risk-guides/soft-drink-bottlers-naics-312111/)
- [Craft breweries, microbreweries and brewpubs NAICS 312120](https://www.urbanstat.com/industry-risk-guides/craft-breweries-microbreweries-and-brewpubs-naics-312120/)
- [Corrugated box manufacturers NAICS 322211](https://www.urbanstat.com/industry-risk-guides/corrugated-box-manufacturers-naics-322211/)
- [Compare Metal can manufacturers with Glass container and glassware manufacturers](https://www.urbanstat.com/industry-risk-guides/compare/?a=metal-can-manufacturers-naics-332431&b=glass-container-and-glassware-manufacturers-naics-327213)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/metal-can-manufacturers-naics-332431/

- Page: Metal can manufacturers (NAICS 332431, SIC 3411): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/metal-can-manufacturers-naics-332431/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
