---
title: "Hydroelectric plants: Industry Risk Guide"
description: "Hydroelectric plants use water held behind dams or diverted through canals and penstocks to spin turbines and generators, including pumped storage and…"
url: https://www.urbanstat.com/industry-risk-guides/hydroelectric-plants/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Hydroelectric plants

Hydroelectric plants use water held behind dams or diverted through canals and penstocks to spin turbines and generators, including pumped storage and tidal schemes. Losses come from floods that overwhelm structures, turbine and generator breakdown, and the downstream damage and injury when a dam, gate or penstock fails.

Utilities · NAICS 221111 · SIC 4911 · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption High](#line-bi)
3. [Premises liability High](#line-gl)
4. [Products and completed work Low](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Low](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess Severe](#line-umbrella)

**Umbrella and excess.** A dam breach or uncontrolled release can flood towns downstream, causing deaths and damage far beyond any primary limit.

Loss drivers

## Where losses come from.

1. Turbine, generator and transformer breakdown from cavitation, wear or insulation failure in aging units
2. Floods and debris that overwhelm spillways, damage gates and fill powerhouses
3. Dam, gate or penstock failures and sudden releases that harm people and property downstream

How it compares Each line’s rating against the average for its NAICS sector, Utilities (10 business types), and for all 747.

- Hydroelectric plants
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 4.0; all business types 2.9.
2. Business interruption Interruption Business interruption: High, 4 of 5; sector average 3.7; all business types 2.7.
3. Premises liability Premises Premises liability: High, 4 of 5; sector average 3.7; all business types 2.7.
4. Products and completed work Products Products and completed work: Low, 1 of 5; sector average 2.2; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.2; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.2; all business types 2.5.
7. Crime and theft Crime Crime and theft: Low, 1 of 5; sector average 1.7; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.8; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 3.2; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 3.3; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Severe, 5 of 5; sector average 4.2; all business types 3.6.

What’s changing

- Heavier rainfall and faster snowmelt push floods beyond what older spillways were designed to pass, raising overtopping risk and downstream liability.
- Plants increasingly follow wind and solar output with frequent starts and stops, which wears turbines, windings and seals faster.
- Remote control of whole fleets cuts staffing at each dam, so fewer people are on hand to spot seepage, debris or gate faults early.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Powerhouses sit low beside rivers, so a flood or penstock burst can submerge every unit, and generator fires burn out windings.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Powerhouse below flood level with doors and cable trenches open to water
- Generators with aging insulation and no fire suppression
- Penstocks with corrosion, leaking joints or unstable slopes above

**Controls that matter**

- Flood barriers, sealed penetrations and dewatering pumps on backup power
- Gas suppression or water spray on generators and transformers
- Penstock inspections and automatic shut-off valves at the intake

### Business interruption: High (4 of 5)

Units are custom built, so rewinding a generator or replacing a runner takes many months while that unit earns nothing.

Covers: How long and how costly a shutdown is.

**Watch for**

- One large unit producing most of the station's output
- Aging units with no recent rewind or refurbishment

**Controls that matter**

- Spare runner parts, stator bars or a fleet spare transformer
- Overhauls staggered so only one unit is down at a time

### Premises liability: High (4 of 5)

Reservoirs and tailraces draw boaters and swimmers, sudden releases sweep people downstream, and gate or dam failures flood property.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Public recreation close to intakes, spillways and tailraces
- Campsites, homes or roads in the downstream flood zone
- Releases made without sirens or alerts downstream

**Controls that matter**

- Booms, buoys and signs keeping people clear of hazardous water
- Warnings issued before planned releases and gate changes
- Emergency action plan with downstream contacts, tested regularly

### Products and completed work: Low (1 of 5)

Power is sold into the grid; harm from water released downstream is a premises and operations exposure.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Reservoir water also sold for irrigation or drinking supply

**Controls that matter**

- Supply agreements limiting liability for shortfalls and quality

### Workers’ injury: Elevated (3 of 5)

Staff enter penstocks and scroll cases, work near deep fast water and handle high-voltage equipment at remote sites.

Covers: Injuries and illness to employees.

**Watch for**

- Water passage entries without double isolation of gates
- Work over water without life jackets or a rescue boat

**Controls that matter**

- Double isolation and lockout of gates before any water passage entry
- Throw lines, life jackets and a rescue boat for all work over water

### Commercial auto: Moderate (2 of 5)

Crews drive mountain and rural roads to remote dams, often at night and in storms when flows rise.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Call-outs during floods on roads prone to slides or washouts

**Controls that matter**

- Driver training, telematics and journey checks for remote call-outs

### Crime and theft: Low (1 of 5)

There is no cash; copper, tools and fuel at remote stations, and trespass on dams, are the concerns.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Unstaffed stations with no cameras or intrusion alarms

**Controls that matter**

- Cameras and alarms on powerhouses, gate structures and switchyards

### Inland marine and equipment: Elevated (3 of 5)

Runners, generator parts and transformers go to specialist shops, and work boats, cranes and trash rakes operate on the water.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Major components shipped for repair without transit cover
- Floating plant and work boats in fast water near intakes

**Controls that matter**

- Transit cover and rigging plans for runners and stator parts sent to shops
- Scheduled cover for boats, cranes and floating equipment

### Environmental: Elevated (3 of 5)

Any spill goes straight into the river: bearing and governor oil, transformer oil, and sediment flushed downstream.

Covers: Pollution on or from the site or the work.

**Watch for**

- Oil-lubricated bearings leaking into tailrace water
- Sediment flushing or drawdowns that kill fish downstream

**Controls that matter**

- Water-lubricated bearings or biodegradable oils in parts that touch water
- Oil separators on powerhouse drainage, with sumps checked routinely

### Cyber and data: Elevated (3 of 5)

Units and gates are run from central control rooms, so an intrusion could trip generation or move spillway gates.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Gate controls reachable from business networks or the internet
- Vendor and contractor accounts with permanent remote access

**Controls that matter**

- Separated control networks with local manual override of gates
- Remote gate moves alarmed and confirmed locally, with vendor logins granted per session

### Professional liability: Low (1 of 5)

The owner sells power, not advice; design and inspection errors fall on engineers and contractors.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Dam operation or engineering services provided to other owners

**Controls that matter**

- Defined scope and liability limits in any dam services contract

### Umbrella and excess: Severe (5 of 5)

A dam breach or uncontrolled release can flood towns downstream, causing deaths and damage far beyond any primary limit.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Dams with homes, roads or campsites in the inundation zone

**Controls that matter**

- Independent dam safety reviews, with recommendations closed on schedule

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Concrete or earth-fill dams, spillways with steel gates, and reinforced concrete powerhouses partly below tailwater, often many decades old, fed by penstocks or tunnels and linked to outdoor switchyards.
- **Occupancy**: Water-driven turbines and large generators with oil-filled bearings, governors and transformers, run remotely with few staff on site, and cable galleries that carry fire between units.
- **Protection**: Fire suppression on generators and transformers, flood barriers and dewatering pumps, gates that close or open without grid power, and dam instrumentation reviewed by dam safety engineers.
- **Exposure**: Upstream rainfall, snowmelt, debris and slides into the reservoir drive the risk; downstream towns, roads and campsites decide how severe any release or breach becomes.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- How high is the dam, what is it built of, and what hazard rating has the dam safety authority given?
- When was the last independent dam safety inspection, and which recommendations remain open?
- How old are the turbines, generators and transformers, and when were they last rewound or refurbished?
- Can the spillway pass the current design flood, and has that been checked against recent rainfall estimates?
- What lies in the downstream inundation zone: homes, campsites, roads or other dams?
- What caused each forced outage and claim in recent years?

### Documents to request

- Dam safety inspection reports and the status of open recommendations
- Emergency action plan and downstream inundation maps
- Generator, turbine and transformer test and overhaul records
- Loss runs and forced outage history for recent years

### On site: dam and waterways

- What do seepage, settlement and movement readings show, and who reviews them?
- Can spillway gates be opened on backup power and by hand if remote control fails?
- How are debris, ice and sediment kept away from intakes and gates?

### On site: powerhouse

- Where are the lowest openings, and how would floodwater or a penstock burst be kept out?
- What fire protection covers generators, transformers and cable galleries?
- What did the last inspection find on runners, wicket gates and generator windings?

### On site: public and people

- How are boaters and swimmers warned and kept away from intakes, spillways and tailraces?
- How are confined space entries into penstocks and scroll cases controlled?
- How are sirens or alerts triggered for planned and emergency releases downstream?

### On site: controls and records

- Who can operate gates and units remotely, and how is that access protected?
- When were the governor, overspeed protection and emergency intake closure last tested, and what was found?

### Refer or decline if you find

- Dam safety recommendations open past their due dates
- Spillway unable to pass the current design flood
- Powerhouse below likely flood levels with no flood barriers
- Gates that depend on grid power with no backup or manual means
- Homes or campsites in the inundation zone with no warning system

Location

## How UrbanStat data helps.

Upstream rainfall and snowmelt set the flood load on the dam. Earthquakes and landslides into a reservoir can damage structures or send a wave over the crest, and wildfire burns access roads and loads rivers with debris.

Flood · Earthquake · Landslide · Wildfire

- Flood and landslide scores at the powerhouse, dam and switchyard show where water or slope failure threatens the most valuable equipment.
- Parcel and building data downstream, including construction date and building value, help size what a sudden release or breach could damage.
- Live wildfire perimeters and hurricane tracks show which insured dams and powerhouses lie in the path of fire or heavy upstream rain, so teams can confirm gate operation.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Earthquake · Landslide · Wildfire

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**1.7** recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Electric power generation

**1.7**

All private industry

**2.3**

0.9 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Electric power generation (NAICS 22111), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**5** fatal work injuries in 2024.

United States, private industry, 2024. Industry: Electric Power Generation (NAICS 22111), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm).

Most cited safety standards

**33** citations from 6 inspections; 55% were classed serious, willful or repeat.

- 1910.269 Electric power generation, transmission, and distribution **14**
- 1904.29 Forms **9**
- 1910.147 The control of hazardous energy (lockout/tagout) **3**
- 1910.28 Duty to have fall protection and falling object protection **2**
- 1910.157 Portable fire extinguishers **1**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Hydroelectric Power Generation (NAICS 221111). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**1** facilities reported toxic chemical releases.

United States, 2024. Industry: Hydroelectric Power Generation (NAICS 221111). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Generator winding faults, cracked runners and transformer failures are the most frequent large losses, usually without fire.
- **Watercraft**: Boats used for debris clearing, boom work and inspections need their own hull and liability cover.
- **Builders risk**: Refurbishment and uprating projects open up units and penstocks while the rest of the plant keeps running.
- **Off-premises transmission interruption**: Remote stations often export over one line through rugged terrain, and its loss stops sales with every unit intact.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [221111](https://www.urbanstat.com/industry-risk-guides/naics/?q=221111) | Hydroelectric Power Generation |
| NAICS 2022 | [221118](https://www.urbanstat.com/industry-risk-guides/naics/?q=221118) | Other Electric Power Generation |
| SIC 1987, primary | [4911](https://www.urbanstat.com/industry-risk-guides/sic/?q=4911) | Electric Services |

**Related business types**

- [Waterworks and water supply utilities](https://www.urbanstat.com/industry-risk-guides/waterworks-and-water-supply-utilities/)
- [Thermal power plants](https://www.urbanstat.com/industry-risk-guides/thermal-power-plants/)
- [Wind farms](https://www.urbanstat.com/industry-risk-guides/wind-farms/)
- [Electric utilities](https://www.urbanstat.com/industry-risk-guides/electric-utilities/)
- [Battery energy storage facilities](https://www.urbanstat.com/industry-risk-guides/battery-energy-storage-facilities/)
- [Compare Hydroelectric plants with Waterworks and water supply utilities](https://www.urbanstat.com/industry-risk-guides/compare/?a=hydroelectric-plants&b=waterworks-and-water-supply-utilities)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/hydroelectric-plants/

- Page: Hydroelectric plants: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/hydroelectric-plants/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
