---
title: "Furniture refinishing and repair shops: Industry Risk Guide"
description: "Furniture refinishers strip old coatings with solvents or caustic, repair the wood, then stain and spray new lacquer or varnish. Flammable liquids,…"
url: https://www.urbanstat.com/industry-risk-guides/furniture-refinishing-and-repair-shops/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Furniture refinishing and repair shops

Furniture refinishers strip old coatings with solvents or caustic, repair the wood, then stain and spray new lacquer or varnish. Flammable liquids, finish-soaked rags, overspray and wood dust share a small workshop that also holds customers' furniture, some of it irreplaceable.

Other Services (except Public Administration) · NAICS 811420 · SIC 7641 · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption Moderate](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work Moderate](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Low](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Low](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess Moderate](#line-umbrella)

**Property.** Lacquers, thinners and strippers are used in the open beside sanding dust, drying furniture and woodworking machines.

Loss drivers

## Where losses come from.

1. Fires from spraying flammable finishes and from oily rags that self-heat
2. Loss of customers' furniture and antiques in a shop fire or in transit
3. Worker illness from stripper vapors, isocyanates and wood dust

How it compares Each line’s rating against the average for its NAICS sector, Other Services (except Public Administration) (40 business types), and for all 747.

- Furniture refinishing and repair shops
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 2.5; all business types 2.9.
2. Business interruption Interruption Business interruption: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 2.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Moderate, 2 of 5; sector average 2.5; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 2.5; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.1; all business types 2.5.
7. Crime and theft Crime Crime and theft: Low, 1 of 5; sector average 2.1; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.1; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 1.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Low, 1 of 5; sector average 2.2; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 2.2; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Moderate, 2 of 5; sector average 3.1; all business types 3.6.

What’s changing

- Methylene chloride strippers are being phased out, and the replacements work more slowly and bring their own fire and health hazards.
- Waterborne and catalyzed coatings replace many nitrocellulose lacquers, cutting the fire load but adding isocyanate exposure for sprayers.
- Online resale of vintage and mid-century furniture brings pieces shipped in from distant owners, raising transit and agreed-value questions.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Lacquers, thinners and strippers are used in the open beside sanding dust, drying furniture and woodworking machines.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Spraying in a homemade booth or the open shop
- Rags with linseed or stain oils left in heaps
- Overspray residue built up on booth walls, fans and filters

**Controls that matter**

- Listed spray booth with explosion-rated electrics and its own sprinklers
- Self-closing metal cans for rags, emptied daily
- Flammable liquids limited to a day's supply outside approved cabinets

### Business interruption: Moderate (2 of 5)

Small shops with ordinary tools can restart elsewhere, though the spray booth takes time to replace.

Covers: How long and how costly a shutdown is.

**Watch for**

- Contract work for hotels or offices with completion deadlines
- One craftsman holding the specialist skills

**Controls that matter**

- Arrangement to rent booth time at another shop
- Job records and customer details backed up off site

### Premises liability: Moderate (2 of 5)

Few customers enter the workshop; the exposure is deliveries and touch-up work in clients' homes and offices.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- On-site refinishing of floors, cabinets or paneling in occupied buildings
- Showroom reached through the work area

**Controls that matter**

- Ventilation and ignition control rules for on-site finishing
- Customers kept out of stripping and spray rooms

### Products and completed work: Moderate (2 of 5)

A repaired chair or bed that gives way injures someone now and then; finishes on cribs or tableware raise toxicity questions.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Structural repairs to chairs, ladders, cribs or bunk beds
- Old lead-painted items stripped and returned

**Controls that matter**

- Glued joints clamped and fully cured before release
- Child-safe finishes used on juvenile furniture

### Workers’ injury: Elevated (3 of 5)

Solvent and caustic strippers, lacquer vapors, wood dust and saws combine chemical and mechanical injury.

Covers: Injuries and illness to employees.

**Watch for**

- Methylene chloride stripper still in use, worst in small unventilated rooms
- Workers reaching into dip tanks
- Sanding old finishes that contain lead

**Controls that matter**

- Local exhaust at stripping and spray stations
- Respirators matched to the chemicals, with fit tests
- Guards and dust collection on all woodworking machines

### Commercial auto: Moderate (2 of 5)

A van or box truck collects and returns furniture locally, a few trips a day.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Employees lifting heavy pieces without a lift gate
- Solvents carried in the cab for on-site work

**Controls that matter**

- Driver record checks
- Lift gate, straps and blankets in every vehicle

### Crime and theft: Low (1 of 5)

Little cash and nothing easy to resell, apart from the occasional valuable antique.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- High-value antiques held for long restoration jobs

**Controls that matter**

- Monitored alarm and a record of valuable pieces on site

### Inland marine and equipment: Elevated (3 of 5)

Customers' furniture, pianos and antiques sit in the shop for weeks and travel in the shop's truck.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Museum, dealer or collector pieces accepted without agreed values
- Furniture stored in the spray or stripping area
- Long backlogs with pieces stacked in aisles

**Controls that matter**

- Bailee cover on a stated or agreed value basis
- Intake photographs and written condition reports
- Finished pieces stored in a separate, cut-off room

### Environmental: Elevated (3 of 5)

Stripping tanks, spent solvents, finish sludge and rinse water are hazardous wastes generated on a small site.

Covers: Pollution on or from the site or the work.

**Watch for**

- Rinse water from stripping flowing to floor drains or the yard
- Drums of old stripper sludge accumulating outdoors
- Long-established sites with past dumping

**Controls that matter**

- Closed-loop rinse or licensed wastewater disposal
- Waste drums on containment, collected with manifests
- Solvent recovery still operated to its instructions

### Cyber and data: Low (1 of 5)

Customer contacts, photographs and invoices sit on a laptop or phone, and the work depends on no networked system.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Deposit requests sent by email, where payment details can be spoofed

**Controls that matter**

- Hosted card terminal and call-back checks on any payment change

### Professional liability: Moderate (2 of 5)

Stripping or refinishing an antique can destroy much of its value, and owners blame the shop's advice.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Valuations or authenticity opinions given to customers
- Conservation work on museum or collector pieces

**Controls that matter**

- Written treatment plan approved by the owner before work starts
- No valuations offered beyond the shop's real expertise

### Umbrella and excess: Moderate (2 of 5)

Liability losses are modest; the worst cases are a shop fire spreading to neighbors or a collapsed chair injuring someone.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Shop in a mixed-use building with residents above
- Contract seating repaired for hotels or public venues

**Controls that matter**

- Fire separation from neighbors and solvent stock kept low
- Load checks on repaired seating before return

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Older light-industrial units, converted garages and barns, often wood-framed or ordinary masonry with wood roofs, sometimes sharing walls with other small trades.
- **Occupancy**: Solvent and caustic stripping, lacquer and varnish spraying, sanding and woodworking, with finish-soaked rags, drying pieces and customers' furniture packed into the same space.
- **Protection**: A listed spray booth with sprinklers and rated electrics, rag cans emptied daily, flammable liquid cabinets, dust collection, and monitored fire and intrusion alarms.
- **Exposure**: Close neighbors in older industrial rows or on rural lots, shared walls that pass fire both ways, and floodable yards where waste drums can wash away.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What are annual sales, and how are they split between refinishing, repair, restoration and on-site work?
- Does the shop work for dealers, museums, hotels or designers, and under what contracts?
- Does the shop own its building, and what other tenants or trades share it?
- How many employees strip and spray, and how long have they been with the shop?
- Does the shop sell refinished pieces of its own, online or through dealers?

### Documents to request

- Loss runs for the current and prior policy terms
- Spray booth installation and sprinkler inspection records
- Hazardous waste manifests and hauler contract
- Sample work order with condition and value terms

### On site: work performed

- How are old finishes removed: dip tank, flow-over table, hand stripping, sanding or blasting?
- Which strippers and finishes are used: solvent, caustic, water-based, lacquer, catalyzed varnish?
- How are vapors and ignition sources controlled when finishing inside customers' buildings?

### On site: finishing and fire control

- Where is spraying done, and is the booth listed, ventilated and sprinklered?
- How are used rags, filters and overspray residues handled each day?
- How much flammable liquid is on site, and where is it stored and mixed?
- How is dust from sanding and machining collected and removed?

### On site: customers' goods

- What is the highest value of customers' furniture on site, and how is it established?
- Where are finished and waiting pieces stored relative to the spray area?
- Who collects and delivers, and how are pieces protected in transit?

### On site: people and waste

- What ventilation and respirators protect workers at the stripping tank?
- Where do rinse water, spent stripper and sludge go, and who hauls them?
- What fires or customer property claims have occurred, including small ones?

### Refer or decline if you find

- Spraying lacquer in the open shop with ordinary fans
- Oily rags in open bins or cardboard boxes
- Stripping rinse water discharged to the ground or storm drain
- Antiques accepted with no values or condition records
- Wood-frame building with no sprinklers and heavy solvent stock

Location

## How UrbanStat data helps.

Shops occupy older light-industrial or converted buildings, often wood-framed and close to neighbors. Customers' pieces cannot be replaced after a flood or wildfire, and drums of solvent waste on a flooded site become a pollution claim.

Flood · Wildfire

- Parcel and permit data reveal the building's construction date and any spray booth or electrical permits, a check on a workshop in an old converted structure.
- Flood scores at the address show whether customers' furniture and drums of stripping waste sit at risk of inundation.
- Wildfire scores at the property level flag workshops on the wildland edge, where solvent stock and wooden goods make a building hard to defend.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Wildfire

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**1.8** recordable injuries and illnesses per 100 full-time workers, below the private-industry average of 2.3.

Personal and household goods repair and maintenance

**1.8**

All private industry

**2.3**

1.1 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Personal and household goods repair and maintenance (NAICS 8114), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**13** fatal work injuries in 2024, most often from exposure to harmful substances or environments (3).

Other services

**3.3**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Personal and Household Goods Repair and Maintenance (NAICS 8114), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**153** citations from 35 inspections; 54% were classed serious, willful or repeat.

- 1910.1200 Hazard communication **19**
- 1910.147 The control of hazardous energy (lockout/tagout) **11**
- 1910.178 Powered industrial trucks **10**
- 1910.28 Duty to have fall protection and falling object protection **5**
- 1910.305 Wiring methods, components, and equipment for general use **5**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Personal and Household Goods Repair and Maintenance (NAICS 8114), the closest published group. Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Bailee customers' goods**: Customers' furniture sits in the shop for weeks and is often worth more than the shop's own contents.
- **Pollution legal liability**: Stripper rinse water, spent solvents and sludge can contaminate soil and drains on small, older sites.
- **Fine arts for high-value pieces**: Antiques and collector pieces need agreed values, and ordinary bailee limits rarely match what they are worth.
- **Equipment breakdown**: Spray booth fans, compressors and dust collectors fail without any fire and stop finishing work.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [811420](https://www.urbanstat.com/industry-risk-guides/naics/?q=811420) | Reupholstery and Furniture Repair |
| SIC 1987, primary | [7641](https://www.urbanstat.com/industry-risk-guides/sic/?q=7641) | Reupholstery and Furniture Repair |

**Related business types**

- [Upholstery shops](https://www.urbanstat.com/industry-risk-guides/upholstery-shops/)
- [Woodworking shops](https://www.urbanstat.com/industry-risk-guides/woodworking-shops/)
- [Antique dealers](https://www.urbanstat.com/industry-risk-guides/antique-dealers/)
- [Art conservators and restorers](https://www.urbanstat.com/industry-risk-guides/art-conservators-and-restorers/)
- [Wood furniture manufacturers](https://www.urbanstat.com/industry-risk-guides/wood-furniture-manufacturers/)
- [Compare Furniture refinishing and repair shops with Upholstery shops](https://www.urbanstat.com/industry-risk-guides/compare/?a=furniture-refinishing-and-repair-shops&b=upholstery-shops)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/furniture-refinishing-and-repair-shops/

- Page: Furniture refinishing and repair shops: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/furniture-refinishing-and-repair-shops/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
