---
title: "Foundries (NAICS 331511, SIC 3321): Industry Risk Guide"
description: "NAICS 331511 · SIC 3321. Foundries melt iron, steel, aluminum, brass or other alloys and pour or inject the metal into sand, ceramic or steel molds. Liquid…"
url: https://www.urbanstat.com/industry-risk-guides/foundries-naics-331511/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Foundries NAICS 331511 · SIC 3321

Foundries melt iron, steel, aluminum, brass or other alloys and pour or inject the metal into sand, ceramic or steel molds. Liquid metal, moisture, combustible binders and hydraulic oil share the same floor, and the workforce faces heat, dust, noise and heavy handling every shift.

[**NAICS 331511** Iron Foundries](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331511) · [**SIC 3321** Gray and Ductile Iron Foundries](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3321) · [**NAICS 331523** Nonferrous Metal Die-Casting Foundries](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331523) · [**NAICS 331524** Aluminum Foundries (except Die-Casting)](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331524)

Manufacturing · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption High](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury Severe](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental High](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Workers’ injury.** Among the most injurious manufacturing settings: metal splash burns, silica and metal fume, heat, noise, vibration and heavy lifting together.

Loss drivers

## Where losses come from.

1. Molten metal run-outs, spills and steam explosions at furnaces, ladles and molds
2. Burns, silica disease, strains and hand injuries among melting, molding and finishing staff
3. Fires in hydraulic die-casting machines, core rooms, pattern stores and dust collectors

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Foundries, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Severe, 5 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: High, 4 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Vehicle makers are casting large single-piece body structures in huge die-casting cells, concentrating value, hydraulic fire load and interruption risk in few machines.
- Rules on silica and metal fume keep tightening, pushing foundries toward mechanized finishing, enclosed shakeout and medical surveillance, while legacy disease claims still emerge.
- Printed sand molds and cores cut pattern storage and lead times, but bring printer resins and costly new equipment into the core room.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Molten metal meets water, oil or combustibles easily; induction furnace run-outs and hydraulic fires on die-casting machines are regular causes.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Furnace linings run past their wear limit
- Mineral hydraulic oil on die-casting machines
- Wooden patterns and flammable core binders stored near pouring

**Controls that matter**

- Lining wear monitoring, ground-leak detection and dry run-out pits
- Fire-resistant hydraulic fluid and sprinklers over die-casting cells
- Separate, protected pattern store and core room

### Business interruption: High (4 of 5)

Furnaces, molding lines and customers' patterns are hard to replace, and castings are often single-sourced for assembly plants.

Covers: How long and how costly a shutdown is.

**Watch for**

- Just-in-time supply to vehicle or equipment assembly lines
- One melting furnace or one automatic molding line
- Patterns and dies with no duplicates or drawings

**Controls that matter**

- Spare furnace coils, power supplies and linings on hand
- Pattern and die register with digital models held off site
- Agreed backup foundry for key parts

### Premises liability: Moderate (2 of 5)

Visitors are few, but smoke, odor and noise bring complaints where housing has grown up around an old plant.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Residential neighbors close to melting or shakeout stacks
- Artists or hobby groups allowed to pour

**Controls that matter**

- Fume capture at melting, pouring and shakeout
- Visitor rules that keep outsiders behind barriers during pours

### Products and completed work: Elevated (3 of 5)

Castings become brake parts, valves, pump bodies and structural fittings; hidden porosity or wrong chemistry causes failures downstream.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Safety-critical vehicle, rail, aircraft or pressure-containing castings
- Brass or bronze for drinking water fittings
- Contracts accepting recall and line-stoppage costs

**Controls that matter**

- Spectrometer check on every melt with heat numbers cast in
- Radiographic or other non-destructive testing where specified
- Contract review limiting consequential damages

### Workers’ injury: Severe (5 of 5)

Among the most injurious manufacturing settings: metal splash burns, silica and metal fume, heat, noise, vibration and heavy lifting together.

Covers: Injuries and illness to employees.

**Watch for**

- Wet, oily or sealed scrap charged into the furnace
- Manual pouring from hand ladles
- Grinding and chipping castings with hand tools all shift

**Controls that matter**

- Charge preheating or drying and full molten-metal protective clothing
- Mechanized pouring, shakeout and casting handling
- Dust extraction with silica monitoring and hearing and lung surveillance

### Commercial auto: Moderate (2 of 5)

Castings ship by carrier or a small own fleet; loads are dense and heavy.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Own trucks delivering to assembly plants on fixed schedules

**Controls that matter**

- Load securing for bins of castings and driver record checks

### Crime and theft: Moderate (2 of 5)

Copper-base ingot, scrap and finished brass or bronze castings are attractive; iron and steel are not.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Nonferrous ingot and returns stored in an unlocked yard

**Controls that matter**

- Caged metal store with weigh-in and weigh-out records

### Inland marine and equipment: Elevated (3 of 5)

Customers' patterns, core boxes and dies stay in the foundry for years and can be worth more than the building.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- No inventory or agreed values for customer-owned tooling
- Wooden patterns stored in an unsprinklered loft or shed

**Controls that matter**

- Tooling register with owner, value and storage location
- Written terms on responsibility for patterns and dies

### Environmental: High (4 of 5)

Spent sand, slag, furnace dust and binder residues carry metals and phenols, and stacks emit fume and odor.

Covers: Pollution on or from the site or the work.

**Watch for**

- Decades of foundry sand used as fill on site
- Leaded brass or bronze melting
- Coke-fired cupola melting with limited emission control

**Controls that matter**

- Baghouses and scrubbers maintained and stack tested
- Waste sand characterized and sent to licensed reuse or disposal
- Sealed, diked storage for binders, catalysts and oils

### Cyber and data: Elevated (3 of 5)

Die-casting cells, molding lines and melt controls are networked, and castings ship to tight schedules; ransomware stops pours and deliveries.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Melt and molding controls reachable from office networks
- Customer portals and schedules with no offline fallback

**Controls that matter**

- Segmented networks for furnaces, molding lines and die-casting cells
- Offline backups of recipes, pattern models and quality records

### Professional liability: Moderate (2 of 5)

Foundries often advise on casting design, alloy and gating, and some sell simulation or engineering that customers rely on.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Casting design or alloy selection done for the customer
- Simulation or engineering services billed separately

**Controls that matter**

- Customer approval of drawings, alloy and test requirements
- Written limits on liability for design assistance

### Umbrella and excess: High (4 of 5)

A cracked brake, steering or pressure casting can injure many people downstream, and a furnace explosion can hurt visitors and contractors.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Safety-critical castings for vehicles, rail or pressure systems
- Contractors relining furnaces or working near molten metal

**Controls that matter**

- Traceable heat numbers and nondestructive testing on critical parts
- Contractors kept out of melt areas during pours

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Older masonry or steel-frame high bays with crane runways, below-floor furnace and molding pits, timber pattern lofts, and additions built around original melt shops over decades.
- **Occupancy**: Induction or cupola melting beside water-cooled coils, resin and oil core binders, hydraulic die-casting machines, wooden patterns, wax rooms and dewax autoclaves at investment foundries, grinding dust and magnesium or aluminum fines.
- **Protection**: Dry run-out pits and ground-leak detection, sprinklers over die-casting cells, core rooms and pattern stores, explosion protection on dust collectors, and monitored alarms.
- **Exposure**: Many old foundries sit in river valleys or older industrial districts where housing has grown close, with shared walls, neighbors' storage and odor complaints.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- Which metals are melted, including magnesium, by which casting methods and furnace types?
- What are the castings used for, and what share goes to safety-critical vehicle, rail or pressure uses?
- What do customer contracts say about recalls, line stoppages and consequential damages?
- Which customers take the largest share of output, and are castings single-sourced to them?
- What run-outs, explosions, fires or serious burn injuries have occurred, and what changed afterward?

### Documents to request

- Loss runs with incident reports for run-outs and fires
- Furnace lining and ground-leak detector maintenance records
- Silica and metal fume exposure monitoring results
- Customer-owned tooling register with agreed values
- Sample customer purchase terms covering recall and warranty

### On site: molding and finishing

- Which molding and core-making lines are running, and what binders do they use?
- How are castings ground, chipped and cleaned, and what extraction serves finishing?

### On site: melting and fire protection

- How is furnace lining wear tracked, and when was the last reline?
- How is scrap dried or preheated before charging?
- What hydraulic fluid do die-casting machines use, and are the cells sprinklered?
- Where are patterns, core binders and catalysts stored?
- Are dust collectors serving finishing fitted with explosion protection?

### On site: people

- What protective clothing is worn at melting and pouring?
- How is silica exposure measured at molding, shakeout and grinding?
- How much pouring and casting handling is still done by hand?

### On site: environment and records

- Where do spent sand, slag and baghouse dust go?
- What do the injury logs show for burns, eye injuries and strains among melting and finishing staff?

### Refer or decline if you find

- Past furnace run-out or explosion with no change in practice
- Wet scrap charged directly into molten metal
- Die-casting machines on mineral oil with no sprinklers
- Wooden pattern storage unsprinklered and unrecorded
- Waste sand piled or buried on site

Location

## How UrbanStat data helps.

Furnace pits and molding pits sit below floor level, so even shallow flooding puts water under molten metal. Older foundries in river valleys are common. Shaking and wind damage high bays, stacks and cranes.

Flood · Earthquake · Tornado · Wind

- Flood scores at the address show whether water could reach furnace and molding pits, where shallow water under molten metal is an explosion hazard.
- Parcel and permit data give the construction date and permit history of plants that are often very old, including furnace, electrical and dust collector work.
- Street-by-street exposure views show the insured value concentrated at one foundry and the customers nearby that depend on it, with alerts at a set threshold.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Earthquake · Tornado · Wind

Public loss data · NAICS 331511

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**5.5** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Iron foundries

**5.5**

All private industry

**2.3**

1.5 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Iron foundries (NAICS 331511). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**6** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Foundries (NAICS 3315), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**99** citations from 33 inspections; 70% were classed serious, willful or repeat.

- 1910.1053 Respirable crystalline silica **20**
- 1910.134 Respiratory protection **11**
- 1910.184 Slings **6**
- 1910.147 The control of hazardous energy (lockout/tagout) **6**
- 1910.1200 Hazard communication **5**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Iron Foundries (NAICS 331511). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**158** facilities reported toxic chemical releases totaling **15.3 million pounds** on and off site.

- Zinc compounds **7.9M**
- Manganese and manganese compounds **2.2M**
- Manganese compounds **1.5M**

Chemicals released in the largest amounts, in pounds. 112 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Iron Foundries (NAICS 331511). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Induction power supplies, furnace coils and die-casting machines fail without fire and stall every order behind them.
- **Site pollution liability**: Spent sand used as fill, baghouse dust and binder residues leave metals and phenols in soil.
- **Product recall**: Castings sit inside brakes, valves and pumps, so a defect can recall the customer's finished product.
- **Contingent business interruption**: Foundries rely on a few suppliers of scrap, alloys, binders and power, and on large customers.
- **Customers' tooling in care**: Patterns and dies owned by customers are often unvalued, unique and stored in combustible lofts.

## NAICS and SIC codes for foundries

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [331511](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331511) | Iron Foundries |
| NAICS 2022 | [331523](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331523) | Nonferrous Metal Die-Casting Foundries |
| NAICS 2022 | [331524](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331524) | Aluminum Foundries (except Die-Casting) |
| NAICS 2022 | [331513](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331513) | Steel Foundries (except Investment) |
| NAICS 2022 | [331529](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331529) | Other Nonferrous Metal Foundries (except Die-Casting) |
| NAICS 2022 | [331512](https://www.urbanstat.com/industry-risk-guides/naics/#naics-331512) | Steel Investment Foundries |
| SIC 1987, primary | [3321](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3321) | Gray and Ductile Iron Foundries |
| SIC 1987 | [3363](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3363) | Aluminum Die-Castings |
| SIC 1987 | [3365](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3365) | Aluminum Foundries |
| SIC 1987 | [3325](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3325) | Steel Foundries, NEC |

**Related business types**

- [Steel mills NAICS 331110](https://www.urbanstat.com/industry-risk-guides/steel-mills-naics-331110/)
- [Forging and powder metal parts manufacturers NAICS 332111](https://www.urbanstat.com/industry-risk-guides/forging-and-powder-metal-parts-manufacturers-naics-332111/)
- [Commercial heat treaters NAICS 332811](https://www.urbanstat.com/industry-risk-guides/commercial-heat-treaters-naics-332811/)
- [Tool, die, mold and machine tool makers NAICS 333514](https://www.urbanstat.com/industry-risk-guides/tool-die-mold-and-machine-tool-makers-naics-333514/)
- [Scrap metal processors NAICS 423930](https://www.urbanstat.com/industry-risk-guides/scrap-metal-processors-naics-423930/)
- [Compare Foundries with Steel mills](https://www.urbanstat.com/industry-risk-guides/compare/?a=foundries-naics-331511&b=steel-mills-naics-331110)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/foundries-naics-331511/

- Page: Foundries (NAICS 331511, SIC 3321): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/foundries-naics-331511/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
