---
title: "Flooring contractors: Industry Risk Guide"
description: "Flooring contractors install and refinish wood, laminate, vinyl, carpet and resilient floors in homes and commercial buildings. Sanding dust, solvent…"
url: https://www.urbanstat.com/industry-risk-guides/flooring-contractors/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Flooring contractors

Flooring contractors install and refinish wood, laminate, vinyl, carpet and resilient floors in homes and commercial buildings. Sanding dust, solvent finishes and oily rags start fires in houses under renovation, adhesives fail over damp slabs, and installers wear out knees and backs over a working life.

Construction · NAICS 238330 · SIC 1752 · Updated November 2026

Risk profile

1. [Property Elevated](#line-property)
2. [Business interruption Low](#line-bi)
3. [Premises liability High](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Moderate](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Moderate](#line-env)
10. [Cyber and data Moderate](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess Elevated](#line-umbrella)

**Premises liability.** Solvent vapors meet pilot lights and oily rags self-heat inside customers' homes, and one refinishing fire can destroy the whole house.

Loss drivers

## Where losses come from.

1. Fires from oily finishing rags, sanding dust and solvent vapors inside customers' homes
2. Knee, back and repetitive strain injuries from kneeling, kicking carpet and carrying stock
3. Floors that cup, buckle or lift after handover from moisture and subfloor faults

How it compares Each line’s rating against the average for its NAICS sector, Construction (49 business types), and for all 747.

- Flooring contractors
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Elevated, 3 of 5; sector average 2.2; all business types 2.9.
2. Business interruption Interruption Business interruption: Low, 1 of 5; sector average 1.8; all business types 2.7.
3. Premises liability Premises Premises liability: High, 4 of 5; sector average 3.5; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.8; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.8; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 3.1; all business types 2.5.
7. Crime and theft Crime Crime and theft: Moderate, 2 of 5; sector average 1.7; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 3.2; all business types 2.6.
9. Environmental Environmental Environmental: Moderate, 2 of 5; sector average 2.5; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Moderate, 2 of 5; sector average 2.0; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 2.3; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Elevated, 3 of 5; sector average 4.0; all business types 3.6.

What’s changing

- Vinyl plank and click-lock floors now dominate installs, cutting adhesive and solvent use but adding claims over floating floors that separate, peak or buckle with heat and uneven subfloors.
- Water-based finishes and dust-containment sanders cut solvent and dust exposure, but popular hardwax and penetrating oil finishes still leave rags that self-heat and ignite.
- Large multifamily builder contracts push volume and tight schedules onto installers, raising moisture failures over slabs that have not dried.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Elevated (3 of 5)

Warehouse units hold carpet rolls, foam pad and boxed flooring beside solvent finishes, adhesives and used rags brought back from jobs.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Used finishing rags and sander dust bags returned to the shop
- Solvent finishes and adhesives on open shelving beside stock
- Roll racks stacked close to the roof or lights

**Controls that matter**

- Rags and dust bags in water-filled, lidded metal cans, emptied daily
- Flammable finishes in a rated cabinet, with quantities kept low
- Sprinklers or a monitored alarm in the warehouse unit

### Business interruption: Low (1 of 5)

Crews keep working from vans with rented sanders and material shipped direct from distributors to job sites.

Covers: How long and how costly a shutdown is.

**Watch for**

- Builder contracts that depend on one installation crew

**Controls that matter**

- Rental sources for sanders and edgers, and direct-to-site deliveries

### Premises liability: High (4 of 5)

Solvent vapors meet pilot lights and oily rags self-heat inside customers' homes, and one refinishing fire can destroy the whole house.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Oil-based or solvent finishes applied with gas appliances still lit
- Rags, pads or sanding dust left in the home, garage or bins overnight
- Furniture and appliances moved by crews, scraping walls and stairs

**Controls that matter**

- Pilot lights and other ignition sources shut off before finishing starts
- All rags and dust removed in sealed metal cans at day's end
- Water-based or low-solvent finishes wherever the floor allows

### Products and completed work: Elevated (3 of 5)

Floors that cup, buckle, lift or crack, and slippery finishes on stairs, bring repair and injury claims after the crew has left.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Glue-down or wood floors over slabs with no moisture testing
- Nails or staples driven through radiant heating loops or pipes
- High-gloss finishes on stairs or commercial entrances

**Controls that matter**

- Moisture readings and acclimation recorded before installation
- Manufacturer's installation instructions followed and kept with the job file
- Finish sheen and slip rating chosen for stairs, kitchens and entrances

### Workers’ injury: High (4 of 5)

Installers kneel all day, kick carpet with their knees, lift rolls and boxes, and breathe dust and solvent vapors.

Covers: Injuries and illness to employees.

**Watch for**

- Knee kickers used where a power stretcher is needed
- Sanding without dust extraction or finishing without respirators
- Installers classed as independent contractors working only for the firm

**Controls that matter**

- Power stretchers, knee protection and task rotation
- Dust-extracting sanders and fit-tested respirators for finishing
- Injury cover confirmed for every subcontract installer

### Commercial auto: Elevated (3 of 5)

Vans and box trucks carry long rolls, heavy pallets, sanders and cans of finish to new addresses every day.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Rolls overhanging open trucks or pickups
- Solvent finishes carried loose inside enclosed vans

**Controls that matter**

- Roll racks, tie-downs and sealed, secured finish containers
- Driving record checks for every installer who drives

### Crime and theft: Moderate (2 of 5)

Little cash is handled, but crews work alone in customers' homes, and surplus material and remnants leave with installers.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Unvetted subcontract crews given keys or alarm codes
- Material issued to jobs never reconciled against what was laid

**Controls that matter**

- Background checks and a key-control log
- Square footage ordered checked against square footage laid on each job

### Inland marine and equipment: Moderate (2 of 5)

Sanders, edgers, dust extraction rigs and tools ride in vans, and delivered flooring waits on site before installation.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Sanding rigs left in vans overnight
- Costly hardwood delivered days early to unsecured sites

**Controls that matter**

- Tools scheduled, marked and taken out of vans overnight
- Deliveries timed to the installation date

### Environmental: Moderate (2 of 5)

Old resilient tile, sheet vinyl and black mastic can contain asbestos, and waste finishes and solvents need proper disposal.

Covers: Pollution on or from the site or the work.

**Watch for**

- Tear-out of old resilient flooring without testing
- Finish waste and solvent rinse poured into drains

**Controls that matter**

- Suspect tile and mastic sampled first; licensed abatement firms handle positives
- Waste finishes and solvents collected for licensed disposal

### Cyber and data: Moderate (2 of 5)

Estimating, scheduling and card payments run on cloud apps; email takeover and fake payment requests are the usual threats.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- One shared login across estimating, scheduling and banking
- Deposits taken through payment links sent by email or text

**Controls that matter**

- Multi-factor login on email, banking and scheduling apps
- Hosted payment links so card numbers are never stored

### Professional liability: Low (1 of 5)

No design or advice is sold; subfloor and product choices fall under completed work.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Paid moisture surveys or floor condition reports for others

**Controls that matter**

- Written scope and limits for any testing or consulting work

### Umbrella and excess: Elevated (3 of 5)

A refinishing fire can destroy a large home and its contents and injure occupants, well beyond primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Refinishing in large, high-value homes or multi-unit buildings
- Finishing work in occupied apartments sharing corridors

**Controls that matter**

- Higher primary limits for work in high-value homes
- Written fire prevention procedure for every finishing job

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Usually a leased unit in a light industrial or flex building, with a small office, racks for rolls and boxed stock, and a roll-up door.
- **Occupancy**: Carpet, pad and boxed wood flooring stored with adhesives, solvent finishes and stains, and sanders cleaned out with dust bags and rags returned from jobs.
- **Protection**: Sprinklers or a monitored alarm in the warehouse, flammable liquids in rated cabinets, metal cans for rags and dust, and clear aisles between roll racks.
- **Exposure**: Neighboring units share walls and roofs, and the larger exposure sits in customers' homes and buildings, where sanding and finishing happen beside furnishings and gas appliances.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What is the mix of sanding and refinishing, wood installation, carpet, resilient and laminate work?
- What share of work is residential, new construction for builders, or commercial?
- Which finishes are used, and how much of the work uses oil-based or solvent products?
- How many installers are on payroll, how many subcontract, and what cover do subcontractors carry?
- Has any job had a fire or a floor failure claim, and what changed afterwards?

### Documents to request

- Loss runs for the current and prior policy terms
- Written finishing and rag disposal procedure
- Subcontract agreements and certificates of insurance
- Driver list with motor vehicle records
- Data sheets for the finishes and adhesives in use

### On site: work performed

- When nailing or stapling near radiant heat or pipes, how are the lines located first?
- How are concrete slabs and wood subfloors moisture tested, and are readings recorded?
- Before tear-out, who samples old vinyl tile or mastic for asbestos?

### On site: finishing and fire safety

- How are pilot lights, furnaces and other ignition sources shut off before finishing?
- Where do used rags, pads and dust bags go at the end of each day?
- Do sanders have dust extraction, and how is fine dust cleaned from the home?

### On site: shop and vehicles

- Where are finishes, adhesives and solvents stored, and in what quantities?
- How are rolls, pallets and finish cans secured in vans and trucks?
- Who drives company vehicles, and when were driving records last checked?

### On site: people and records

- What knee protection, power stretchers and lifting aids do installers use?
- How are subcontract installers vetted and supervised in customers' homes?
- Are photos, moisture readings and customer sign-offs kept with each job file?

### Refer or decline if you find

- Oily rags or dust bags left in customers' homes overnight
- Solvent finishing with pilot lights or furnaces still running
- Wood or glue-down floors laid over slabs never moisture tested
- Tear-out of old vinyl tile or black mastic done untested
- Uninsured subcontract installers doing most of the work

Location

## How UrbanStat data helps.

Water-sensitive stock in ground-level warehouse units is ruined by flood or a roof leak. After hurricanes and floods, rushed replacement work over wet subfloors brings failures, and vans of tools draw theft.

Flood · Hurricane · Wind · Crime

- Flood scores at the shop address show whether carpet rolls and boxed hardwood kept at floor level would be ruined by rising water, before stock limits are set.
- A job address's construction date from parcel and permit data flags homes old enough for asbestos-bearing vinyl tile and mastic before tear-out is quoted.
- Crime scores at the shop address inform theft terms for sanding rigs, tools and vans parked overnight.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Hurricane · Wind · Crime

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**2.0** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Flooring contractors

**2.0**

All private industry

**2.3**

0.6 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Flooring contractors (NAICS 23833), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**15** fatal work injuries in 2024, most often from exposure to harmful substances or environments (6).

Construction

**9.2**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Flooring Contractors (NAICS 23833), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**261** citations from 70 inspections; 64% were classed serious, willful or repeat.

- 1910.1200 Hazard communication **42**
- 1910.134 Respiratory protection **36**
- 1926.1101 Asbestos **26**
- 1926.1153 Respirable crystalline silica **21**
- 1926.416 General requirements (electrical) **6**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Flooring Contractors (NAICS 238330). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Installation floater**: Hardwood, vinyl plank and carpet delivered to job sites stay at the installer's risk until laid and accepted.
- **Contractors' pollution liability**: Asbestos disturbed during tear-out and solvent spills inside homes are excluded by general liability pollution wording.
- **Contractors' tools and equipment**: Drum sanders, edgers and dust extraction rigs are costly and travel in vans every day.
- **Third-party employee theft**: Crews work unsupervised in customers' homes, and accusations of missing valuables follow even when unfounded.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [238330](https://www.urbanstat.com/industry-risk-guides/naics/?q=238330) | Flooring Contractors |
| SIC 1987, primary | [1752](https://www.urbanstat.com/industry-risk-guides/sic/?q=1752) | Floor Laying and Other Floor Work, NEC |

**Related business types**

- [Tile and marble contractors](https://www.urbanstat.com/industry-risk-guides/tile-and-marble-contractors/)
- [Floor covering stores](https://www.urbanstat.com/industry-risk-guides/floor-covering-stores/)
- [Carpentry contractors](https://www.urbanstat.com/industry-risk-guides/carpentry-contractors/)
- [Painting and wallcovering contractors](https://www.urbanstat.com/industry-risk-guides/painting-and-wallcovering-contractors/)
- [Carpet and upholstery cleaners](https://www.urbanstat.com/industry-risk-guides/carpet-and-upholstery-cleaners/)
- [Compare Flooring contractors with Tile and marble contractors](https://www.urbanstat.com/industry-risk-guides/compare/?a=flooring-contractors&b=tile-and-marble-contractors)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/flooring-contractors/

- Page: Flooring contractors: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/flooring-contractors/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
