---
title: "Flat glass manufacturers and fabricators: Industry Risk Guide"
description: "Flat glass makers melt sand, soda ash and limestone in a furnace that runs without pause for years and float the ribbon over molten tin. Fabricators cut,…"
url: https://www.urbanstat.com/industry-risk-guides/flat-glass-manufacturers-and-fabricators/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Flat glass manufacturers and fabricators

Flat glass makers melt sand, soda ash and limestone in a furnace that runs without pause for years and float the ribbon over molten tin. Fabricators cut, temper, laminate and seal bought-in sheet. Molten glass, continuous firing and heavy, sharp product drive the losses.

Manufacturing · NAICS 327211 · SIC 3211 · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption Severe](#line-bi)
3. [Premises liability Low](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Low](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess Elevated](#line-umbrella)

**Business interruption.** A float line cannot be paused; a glass leak or long power loss forces a cold repair lasting months, with few alternative suppliers.

Loss drivers

## Where losses come from.

1. Furnace leaks, power failures and fuel explosions that freeze or drain the melting tank
2. Deep cuts, crush injuries and burns from handling large hot or broken sheets
3. Tempered, laminated or insulating glass that breaks or fails after installation

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Flat glass manufacturers and fabricators
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Severe, 5 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Solar panel glass and larger, heavier insulating units for energy-efficient buildings raise the value per load and the handling hazard in the plant.
- Furnaces are shifting toward electric boosting, oxy-fuel and hydrogen firing, which changes combustion risks and makes power supply even more critical.
- More recycled cullet in the batch saves energy but brings contamination that can cause inclusions, rejects and spontaneous breakage in tempered glass.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

A tank of molten glass is held at extreme heat for years; a refractory breach spills it into the basement, cables and structure.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Furnace late in its campaign with thinning sidewall refractory
- Hydrogen and nitrogen atmosphere over the tin bath
- Wooden crates, interleaving paper and plastic interlayer stored in the warehouse

**Controls that matter**

- Refractory thickness monitoring with cooling and emergency patching kept ready
- Combustion safeguards and tested emergency power for cooling and controls
- Sprinklers over crate, packaging and interlayer storage

### Business interruption: Severe (5 of 5)

A float line cannot be paused; a glass leak or long power loss forces a cold repair lasting months, with few alternative suppliers.

Covers: How long and how costly a shutdown is.

**Watch for**

- One furnace feeding all downstream coating and fabricating lines
- Contracts to supply vehicle or solar panel makers on tight schedules
- No second independent power feed

**Controls that matter**

- Backup generators and fuel sized to keep the furnace hot
- Planned cold repairs scheduled before refractory reaches its limit
- Supply agreements with other plants for base glass

### Premises liability: Low (1 of 5)

Plants are closed to the public; outside exposure is limited to contractors and drivers collecting loads.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Contractors working during furnace repairs with weak site induction

**Controls that matter**

- Contractor induction and permits for work near hot or overhead hazards

### Products and completed work: Elevated (3 of 5)

Safety glazing is relied on in buildings and vehicles; spontaneous breakage, delamination and seal failure lead to injury and costly replacement programs.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Tempered glass supplied for overhead, balustrade or facade use without heat soaking
- Vehicle or rail glazing with recall exposure
- Long warranties on insulating units and coatings

**Controls that matter**

- Heat-soak testing and fragmentation tests logged per batch
- Permanent marking that traces each pane to a production run
- Contract terms that cap replacement and access costs

### Workers’ injury: High (4 of 5)

Large sheets break without warning, and staff work around furnaces, tempering ovens, cutting tables and overhead handling gear.

Covers: Injuries and illness to employees.

**Watch for**

- Manual handling of large panes off racks and trucks
- Batch house dust from sand and other raw materials
- Hot repairs made on a running furnace

**Controls that matter**

- Vacuum lifters, cranes and secured A-frames in place of manual carrying
- Cut-resistant sleeves, aprons and gloves worn throughout the plant
- Heat stress and hot work procedures for furnace crews

### Commercial auto: Elevated (3 of 5)

Fabricators run their own rack trucks to glaziers and building sites, where a shifted load is lethal.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Glass carried on open exterior racks through city traffic
- Drivers unloading alone at job sites

**Controls that matter**

- Purpose-built racks with load restraint checked before every trip
- Driver training on unloading sequence and rack stability

### Crime and theft: Low (1 of 5)

Sheet glass has no resale appeal; theft is confined to metals, tools and coating materials.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Precious-metal coating targets and tin stock left unsecured

**Controls that matter**

- Locked storage and stock records for coating metals

### Inland marine and equipment: Elevated (3 of 5)

Glass is costly to move and easy to break, and fabricated units for a single project put high value on one truck.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Oversize or coated panes shipped long distances or exported
- Customer-supplied glass taken in for tempering or laminating

**Controls that matter**

- Engineered crates and stillages matched to the route
- Transit cover with limits matched to the largest single load

### Environmental: Elevated (3 of 5)

Furnaces emit combustion gases and dust, batch materials are stored in bulk, and mirror or coating lines use metal salts and solvents.

Covers: Pollution on or from the site or the work.

**Watch for**

- Mirror silvering or painting lines with untreated rinse water
- Bulk fuel oil held as standby furnace fuel

**Controls that matter**

- Stack abatement and monitoring kept within permit
- Diked fuel and chemical storage with treated process water

### Cyber and data: Elevated (3 of 5)

Furnace, tin bath and lehr run on networked process controls, and cutting lines depend on optimization software and order data.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Outside engineers with remote access to furnace and tin bath controls
- Cutting optimization and order systems with no manual fallback

**Controls that matter**

- Process control networks separated from office systems, with tested offline backups
- Manual furnace operating procedures drilled for loss of controls

### Professional liability: Moderate (2 of 5)

Fabricators advise on glass type, thickness and heat soaking for facades and balustrades; a wrong specification leads to breakage or falls.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Glass specification or structural calculations supplied for facade or balustrade projects

**Controls that matter**

- Structural work checked by a licensed engineer, and terms limiting design liability

### Umbrella and excess: Elevated (3 of 5)

Safety glazing that shatters overhead or a balustrade that gives way can kill, and a shifted rack load endangers traffic.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Tempered glass for overhead, balustrade or high-rise facade use
- Vehicle glazing supplied to vehicle makers

**Controls that matter**

- Heat-soak records and traceability that confine a defect to known runs

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Float plants are huge noncombustible buildings with a furnace hall, tin bath and long lehr over basements of cables and cooling lines; fabricators use large steel-frame sheds.
- **Occupancy**: Molten glass held continuously, a hydrogen and nitrogen atmosphere over molten tin, tempering ovens, and stores of wooden crates, interleaving paper, plastic interlayer and sealants.
- **Protection**: Refractory monitoring, glass leak catch pits, emergency power for furnace cooling, combustion safeguards, gas detection at the tin bath, and sprinklers over crate and interlayer storage.
- **Exposure**: Plants sit in industrial zones near suppliers and fabricators; outdoor crate yards and neighbors' storage add fire exposure, and a wide power outage threatens the furnace.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What is the annual melt or fabricated output, and how many furnaces and fabricating lines run?
- Which customers take the largest share of output, and what do contracts say about recall and line stoppage?
- How much of sales is overhead, balustrade, facade or vehicle glazing?
- Are glass specification, structural calculations or installation services offered to customers?
- What furnace incidents, breakage claims or replacement programs have occurred, and how were they resolved?

### Documents to request

- Loss runs including product and warranty claims
- Furnace campaign history and refractory condition reports
- Emergency power test records and utility supply arrangements
- Heat-soak and fragmentation test records for recent batches
- Key customer supply agreements and warranty terms

### On site: operations

- How are tempering furnaces and laminating autoclaves loaded, monitored and maintained?
- How are cut, tempered and laminated panes inspected before packing and dispatch?
- Where are argon, sealants, solvents and coating chemicals stored and handled?

### On site: furnace and utilities

- How old is the furnace campaign, and when is the next cold repair planned?
- How is refractory wear monitored, and what is the glass leak response plan?
- What backup power and cooling water exist, and how often are they tested?
- What combustion safeguards protect the furnace, annealing lehr and tempering ovens?

### On site: storage and handling

- Where are crates, interleaving and plastic interlayers stored, and are those areas sprinklered?
- How are large sheets moved, racked and loaded onto trucks?
- What cut protection is mandatory, and is it worn on the day?

### On site: quality and records

- Is tempered glass heat soaked, and are fragmentation tests recorded by batch?
- Can installed glass be traced back to a production run?
- How are breakage complaints from sites investigated, and are broken panes kept for analysis?

### Refer or decline if you find

- Furnace run past its planned campaign with no repair date
- No emergency power able to hold furnace temperature
- Tempered glass for overhead use shipped without heat soaking
- Large panes handled by hand without lifters or cut protection

Location

## How UrbanStat data helps.

A furnace full of molten glass tolerates neither shaking nor a long power outage. Flood water meeting a hot tank is destructive. Wide roofs and outdoor crate yards are open to wind and hail.

Earthquake · Flood · Hurricane · Wind · Hail

- Earthquake and flood scores at the address show how exposed a continuously fired furnace is to the two perils most likely to force an unplanned cold repair.
- Live event overlays show which glass plants lie in a hurricane's path, where a long power outage threatens the furnace itself.
- Street-by-street exposure views show how much insured value sits around the plant, since a furnace site and its fabricating customers often cluster in one industrial area.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Earthquake · Flood · Hurricane · Wind

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**4.5** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Flat glass manufacturing

**4.5**

All private industry

**2.3**

1.5 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Flat glass manufacturing (NAICS 327211). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**28** fatal work injuries in 2024, most often from transportation incidents (11).

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Nonmetallic Mineral Product Manufacturing (NAICS 327), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**29** citations from 8 inspections; 62% were classed serious, willful or repeat.

- 1910.1200 Hazard communication **4**
- 1910.303 General (electrical) **3**
- 1910.305 Wiring methods, components, and equipment for general use **3**
- 1910.215 Abrasive wheel machinery **2**
- 1910.184 Slings **1**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Flat Glass Manufacturing (NAICS 327211). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**28** facilities reported toxic chemical releases totaling **1.1 million pounds** on and off site.

- Lithium carbonate **635,890**
- Hydrochloric acid **129,253**
- Sulfuric acid **108,091**

Chemicals released in the largest amounts, in pounds. 8 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Flat Glass Manufacturing (NAICS 327211). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Furnace fans, tin bath controls, tempering ovens, laminating autoclaves and transformers fail without fire and stop production.
- **Utility service interruption**: A long loss of gas or power freezes the glass in the tank and forces a cold repair.
- **Contingent business interruption**: Soda ash, tin and coated base glass come from few suppliers, and a few customers take most output.
- **Product recall and replacement**: Faulty safety glazing in vehicles or buildings means tracing, removing and replacing installed panes at high cost.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [327211](https://www.urbanstat.com/industry-risk-guides/naics/?q=327211) | Flat Glass Manufacturing |
| NAICS 2022 | [327215](https://www.urbanstat.com/industry-risk-guides/naics/?q=327215) | Glass Product Manufacturing Made of Purchased Glass |
| SIC 1987, primary | [3211](https://www.urbanstat.com/industry-risk-guides/sic/?q=3211) | Flat Glass |
| SIC 1987 | [3231](https://www.urbanstat.com/industry-risk-guides/sic/?q=3231) | Glass Products Made of Purchased Glass |

**Related business types**

- [Glass container and glassware manufacturers](https://www.urbanstat.com/industry-risk-guides/glass-container-and-glassware-manufacturers/)
- [Glass dealers and installers](https://www.urbanstat.com/industry-risk-guides/glass-dealers-and-installers/)
- [Glassblowing studios](https://www.urbanstat.com/industry-risk-guides/glassblowing-studios/)
- [Door and window installation contractors](https://www.urbanstat.com/industry-risk-guides/door-and-window-installation-contractors/)
- [Stained glass studios](https://www.urbanstat.com/industry-risk-guides/stained-glass-studios/)
- [Compare Flat glass manufacturers and fabricators with Glass container and glassware manufacturers](https://www.urbanstat.com/industry-risk-guides/compare/?a=flat-glass-manufacturers-and-fabricators&b=glass-container-and-glassware-manufacturers)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/flat-glass-manufacturers-and-fabricators/

- Page: Flat glass manufacturers and fabricators: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/flat-glass-manufacturers-and-fabricators/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
