---
title: "Cutlery and flatware manufacturers: Industry Risk Guide"
description: "Cutlery manufacturers blank or forge steel into knives, scissors, razor and saw blades, edge tools and table flatware, then heat treat, grind, polish and…"
url: https://www.urbanstat.com/industry-risk-guides/cutlery-and-flatware-manufacturers/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Cutlery and flatware manufacturers

Cutlery manufacturers blank or forge steel into knives, scissors, razor and saw blades, edge tools and table flatware, then heat treat, grind, polish and fit handles. Every stage after hardening handles a sharp edge, grinding and buffing throw off dust and lint, and the finished goods are small, valuable and often sold direct online.

Manufacturing · NAICS 332215 · SIC 3421 · Updated November 2026

Risk profile

1. [Property Elevated](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Low](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Elevated](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess Elevated](#line-umbrella)

**Workers’ injury.** Hands are on sharp or spinning steel all shift: cuts, wheel bursts, vibration, repetitive motion and metal dust.

Loss drivers

## Where losses come from.

1. Lacerations, repetitive strain and dust exposure among grinders, polishers and assemblers
2. Fires in buffing lint, dust collectors, quench oil and handle materials
3. Knives that break, fold or slip in use, and theft of finished stock

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Cutlery and flatware manufacturers
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Direct-to-consumer web sales have grown, adding card data, age checks and parcel theft to what used to be a wholesale business.
- Powder steels, titanium handles and carbon fiber bring reactive dusts and new grinding hazards that older dust collectors were not built for.
- Robotic grinding and CNC sharpening cut hand-grinding injuries but tie output to programs and networked machines that ransomware can stop.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Elevated (3 of 5)

Buffing lint, polishing compound, quench oil and handle woods and plastics give a metal shop a real fire load.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Lint and compound build-up in buffing ducts and collectors
- Titanium or aluminum grinding dust mixed with steel sparks
- Open quench oil tanks or nitrate salt baths beside furnaces

**Controls that matter**

- Ducts and collectors cleaned on a schedule, with spark detection where fitted
- Separate collection for reactive metal dust
- Quench tank covers, temperature limits and sprinklers overhead

### Business interruption: Elevated (3 of 5)

Forging dies, blanking tools and heat treatment are the pinch points, and sales peak before gift-giving holidays.

Covers: How long and how costly a shutdown is.

**Watch for**

- Heat treating done on one furnace with no outside backup
- Most revenue landing in a short pre-holiday season

**Controls that matter**

- Approved outside heat treater and duplicate critical dies
- Finished stock held at a separate fulfillment location

### Premises liability: Low (1 of 5)

Factory visitors are rare; a factory store or sharpening counter adds ordinary retail exposure.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Factory tours or knife-making classes for the public

**Controls that matter**

- Escorted tours kept behind barriers, with sharp stock in closed displays

### Products and completed work: Elevated (3 of 5)

Users expect blades to cut; locks that release, tips that snap and handles that loosen cause deep hand injuries.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Folding knives with locking mechanisms and assisted opening
- Imported components assembled and sold under the insured's brand
- Online sales without age checks or shipping restrictions

**Controls that matter**

- Lock strength, hardness and handle pull tests per production lot
- Clear use and care warnings on packaging
- Age verification and destination screening built into checkout

### Workers’ injury: High (4 of 5)

Hands are on sharp or spinning steel all shift: cuts, wheel bursts, vibration, repetitive motion and metal dust.

Covers: Injuries and illness to employees.

**Watch for**

- Hand grinding and sharpening on piece-rate pay
- Drop hammers and blanking presses with manual feeding
- Chromium or nickel dust from dry polishing

**Controls that matter**

- Cut-resistant gloves and sleeves suited to each task
- Job rotation and fixtures that take the grip load off hands
- Local exhaust at every wheel with guards and tool rests set

### Commercial auto: Moderate (2 of 5)

Occasional trade show trips and sales calls; shipping is by parcel carrier.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Sales staff carrying sample cases in personal cars

**Controls that matter**

- Non-owned auto cover and driving record checks for sales staff

### Crime and theft: Elevated (3 of 5)

Finished knives are compact, branded and resell easily, and flatware plants hold silver for plating.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Collector-grade or limited-edition knives in open stock
- Silver anodes and plating salts on site
- Returns and seconds leaving through staff sales

**Controls that matter**

- Caged finished goods with cycle counts by serial or batch
- Safe storage and weight reconciliation for silver
- Bag checks and controlled staff purchase scheme

### Inland marine and equipment: Moderate (2 of 5)

Parcels in transit, trade show displays and goods at outside platers or engravers.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- High-value shipments sent by parcel without declared value
- Show stock left in vehicles overnight

**Controls that matter**

- Signature-required shipping and transit limits per parcel
- Show stock inventoried and locked in the venue

### Environmental: Elevated (3 of 5)

Plating, passivating and etching baths, grinding swarf and quench oils create regulated waste streams.

Covers: Pollution on or from the site or the work.

**Watch for**

- In-house silver or chrome plating with cyanide solutions
- Acid etching and passivation rinses to drain
- Oily grinding sludge stored outdoors

**Controls that matter**

- Waste treatment with licensed sludge disposal and discharge testing
- Diked chemical and oil storage on sealed floors

### Cyber and data: Elevated (3 of 5)

Direct online sales hold buyers' card and address details, and ransomware on networked grinders, engravers and order systems stops shipping in peak season.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Own web store taking card payments on a self-managed platform
- CNC grinders and laser engravers on the office network

**Controls that matter**

- Hosted checkout so card numbers never touch the insured's servers
- Production machines segmented from office systems, with offline backups

### Professional liability: Low (1 of 5)

Knives, tools and flatware are sold as products; design faults fall under products, and little advice is given.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Custom industrial blade design or sharpening programs sold to food plants

**Controls that matter**

- Written specifications signed off by the customer for custom blades

### Umbrella and excess: Elevated (3 of 5)

Saw blades that shatter at speed and knife locks that fail cause disabling injuries, and a defect in a popular model multiplies claims.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Saw blades, chain saw chains or slicer blades sold for powered equipment
- Pressure cookers or nonstick cookware made alongside the cutlery

**Controls that matter**

- Limits sized to sales of locking knives and powered-tool blades

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Long-established makers often occupy multi-story brick mill buildings with timber floors; newer firms use single-story steel or masonry units with heat treating and grinding in one open shop.
- **Occupancy**: Forging and furnace hardening with oil quench, wet and dry grinding, buffing that sheds cotton lint and compound, handle work in wood and plastics, and packing in cardboard.
- **Protection**: Sprinklers throughout, spark detection on dust collectors, separate wet collection for titanium and aluminum dust, covered quench tanks, and a monitored intrusion alarm over finished stock.
- **Exposure**: Mill complexes and industrial units share walls and roofs with other tenants, and dust collectors or lint bins set against outside walls can carry fire into the building.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What is the split of sales between retailers, direct online buyers, food service and industrial users?
- Which blades, handles or locking mechanisms are imported, and are any sold under the insured's brand?
- Are pressure cookers, cookware or other kitchen goods made alongside the cutlery, and in what share?
- What are peak values of finished stock and silver on hand, and when do they occur?
- What caused recent injury claims, product complaints and returns, and what changed afterwards?

### Documents to request

- Loss runs showing workers' injury and product claims by term
- Test records for locks, hardness and handle pull strength
- Product catalog with warnings and packaging samples
- Dust collector and sprinkler inspection reports

### On site: products and sales

- What is made: kitchen knives, folding knives, scissors, razor blades, flatware, saw blades or edge tools?
- How are imported parts checked on arrival before assembly?
- How are online orders checked for buyer age and restricted destinations before they ship?
- Where are lock, hardness and handle tests done, and can recent results be seen?

### On site: processes and fire protection

- How is steel hardened: furnace and oil quench, salt bath or outside treater?
- How often are buffing ducts and dust collectors cleaned out?
- Are titanium, aluminum or other reactive metals ground, and how is that dust collected?
- Is plating, etching or passivating done on site, and how is waste handled?

### On site: people

- What hand and arm protection is worn at grinding, sharpening and packing?
- How are repetitive tasks rotated, and is pay tied to piece rate?
- What does the injury record show for cuts and repetitive strain?

### On site: security

- How is finished stock stored, counted and released for shipping?
- How is silver or other precious metal controlled?

### Refer or decline if you find

- Thick lint deposits in buffing ducts and on roof trusses
- Reactive metal dust sharing a collector with steel grinding
- Locking knives sold with no lock strength testing
- Finished knives stored in open racking with no stock control
- Carbide-tipped saw blades sold with no braze or overspeed testing

Location

## How UrbanStat data helps.

Compact, branded stock makes local crime rates relevant to both burglary and parcel theft. Older multi-story mill buildings, common in this trade, bring flood-prone basements holding heat treatment and plating rooms.

Crime · Flood · Wind · Earthquake

- Crime scores at the address inform burglary terms for finished knives and plating silver, which are small, branded and easy to resell.
- Parcel and permit data show the construction date and permit history of older mill-type buildings, a prompt to ask about wiring, sprinklers and dust collection upgrades.
- Flood scores at the address show whether basement heat treating, plating and stock rooms sit in water's path.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Crime · Flood · Wind · Earthquake

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**3.6** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Metal kitchen cookware, utensil, cutlery, and flatware (except precious) manufacturing

**3.6**

All private industry

**2.3**

0.5 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Metal kitchen cookware, utensil, cutlery, and flatware (except precious) manufacturing (NAICS 332215). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**46** fatal work injuries in 2024, most often from contact with objects and equipment (13).

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Fabricated Metal Product Manufacturing (NAICS 332), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**21** citations from 7 inspections; 67% were classed serious, willful or repeat.

- 1910.217 Mechanical power presses **5**
- 1910.147 The control of hazardous energy (lockout/tagout) **4**
- 1910.212 General requirements for all machines **2**
- 1910.1200 Hazard communication **1**
- 1910.132 General requirements (personal protective equipment) **1**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing (NAICS 332215). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**14** facilities reported toxic chemical releases totaling **59,348 pounds** on and off site.

- Aluminum oxide **33,370**
- Chromium **22,028**
- Ammonia **2,007**

Chemicals released in the largest amounts, in pounds. 8 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing (NAICS 332215). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Product recall**: A lock or blade defect across a model forces retailers to pull stock and buyers to return knives.
- **Equipment breakdown**: Hardening furnaces, CNC grinders and blanking presses fail mechanically or electrically, stopping output before the holiday peak.
- **Site pollution liability**: Plating, passivating and grinding sludge can contaminate drains and soil, which general liability pollution exclusions leave uncovered.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [332215](https://www.urbanstat.com/industry-risk-guides/naics/?q=332215) | Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing |
| NAICS 2022 | [332216](https://www.urbanstat.com/industry-risk-guides/naics/?q=332216) | Saw Blade and Handtool Manufacturing |
| NAICS 2022 | [339910](https://www.urbanstat.com/industry-risk-guides/naics/?q=339910) | Jewelry and Silverware Manufacturing |
| SIC 1987, primary | [3421](https://www.urbanstat.com/industry-risk-guides/sic/?q=3421) | Cutlery |
| SIC 1987 | [3914](https://www.urbanstat.com/industry-risk-guides/sic/?q=3914) | Silverware, Plated Ware, and Stainless Steel Ware |
| SIC 1987 | [3423](https://www.urbanstat.com/industry-risk-guides/sic/?q=3423) | Hand and Edge Tools, Except Machine Tools and Handsaws |
| SIC 1987 | [3425](https://www.urbanstat.com/industry-risk-guides/sic/?q=3425) | Saw Blades and Handsaws |

**Related business types**

- [Tool, die, mold and machine tool makers](https://www.urbanstat.com/industry-risk-guides/tool-die-mold-and-machine-tool-makers/)
- [Metal stamping and fabricating shops](https://www.urbanstat.com/industry-risk-guides/metal-stamping-and-fabricating-shops/)
- [Commercial heat treaters](https://www.urbanstat.com/industry-risk-guides/commercial-heat-treaters/)
- [Electroplating and metal finishing shops](https://www.urbanstat.com/industry-risk-guides/electroplating-and-metal-finishing-shops/)
- [Firearm manufacturers](https://www.urbanstat.com/industry-risk-guides/firearm-manufacturers/)
- [Compare Cutlery and flatware manufacturers with Tool, die, mold and machine tool makers](https://www.urbanstat.com/industry-risk-guides/compare/?a=cutlery-and-flatware-manufacturers&b=tool-die-mold-and-machine-tool-makers)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/cutlery-and-flatware-manufacturers/

- Page: Cutlery and flatware manufacturers: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/cutlery-and-flatware-manufacturers/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
