---
title: "Countertop fabricators (NAICS 327991, SIC 3281): Industry Risk Guide"
description: "NAICS 327991 · SIC 3281. Countertop fabricators template, cut, edge and polish slabs of engineered quartz, granite, marble and solid surface, then install…"
url: https://www.urbanstat.com/industry-risk-guides/countertop-fabricators-naics-327991/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Countertop fabricators NAICS 327991 · SIC 3281

Countertop fabricators template, cut, edge and polish slabs of engineered quartz, granite, marble and solid surface, then install the finished tops in kitchens and baths. Cutting quartz releases silica that causes severe, fast-developing lung disease, slabs heavy enough to kill are moved daily, and installed tops bring water, crack and breakage claims.

[**NAICS 327991** Cut Stone and Stone Product Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-327991) · [**SIC 3281** Cut Stone and Stone Products](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3281) · [**NAICS 238340** Tile and Terrazzo Contractors](https://www.urbanstat.com/industry-risk-guides/naics/#naics-238340) · [**NAICS 326199** All Other Plastics Product Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-326199)

Manufacturing · Updated November 2026

Risk profile

1. [Property Moderate](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Elevated](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury Severe](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Low](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Moderate](#line-env)
10. [Cyber and data Moderate](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess Elevated](#line-umbrella)

**Workers’ injury.** Engineered quartz is mostly crystalline silica; dry or poorly wetted cutting causes rapid silicosis in young workers, and falling slabs kill.

Loss drivers

## Where losses come from.

1. Silicosis and other lung disease from cutting and polishing engineered quartz with poor dust control
2. Workers crushed when slabs fall from racks, clamps, carts or delivery frames
3. Damage in customers' homes: cracked tops, dropped sinks, scratched floors and leaks after installation

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Countertop fabricators, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Moderate, 2 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Severe, 5 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Engineered quartz dominates kitchens, and its very high silica content has made silicosis a frequent, severe claim; some places now restrict or ban the material outright.
- CNC saws, waterjets and automated edge polishers now do more cutting wet and enclosed, lowering dust exposure, though handheld finishing and on-site cutouts still produce it.
- Sintered ultra-compact surfaces and lower-silica quartz are gaining share, but they are brittle to cut and still need wet methods and air testing.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Moderate (2 of 5)

Stone and quartz slabs barely burn; the fire load is resin adhesives, acetone, crating timber, solid-surface sheet and the office.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Acetone, epoxy and polyester adhesives left open at work tables
- Waste crating timber and foam piled against the building
- Slab racks that can topple in an earthquake or a forklift strike

**Controls that matter**

- Adhesives and solvents in a rated cabinet, with only a day's supply at benches
- Crating timber removed on a schedule and kept away from walls
- Engineered racks bolted down, with restraint bars and posted load limits

### Business interruption: Elevated (3 of 5)

One CNC bridge saw or waterjet usually cuts every order, and builders move their kitchens to competitors when deadlines slip.

Covers: How long and how costly a shutdown is.

**Watch for**

- A single CNC saw with imported parts and long service lead times
- Most work coming from one or two production homebuilders

**Controls that matter**

- Overflow cutting agreement with another fabricator
- Service contract and critical spares for the saw's spindle, pumps and controls

### Premises liability: Elevated (3 of 5)

Homeowners walk slab yards to choose stone, and crews carry heavy tops through occupied homes past children, pets and finished floors.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Customers browsing slab racks unescorted, especially with children
- Crews disconnecting sinks, cooktops and faucets themselves
- Dust or slurry tracked through homes during on-site cutouts

**Controls that matter**

- Escorted slab viewing in a separate display area with fixed racks
- A licensed plumber or the general contractor reconnecting fixtures
- Floor protection and wet or vacuum-shrouded tools for any on-site cutting

### Products and completed work: Elevated (3 of 5)

Unsupported overhangs snap, undermount sinks drop when adhesive fails, and seams or cutouts crack, leading to replacement and occasional injury.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Bar and island overhangs beyond the stone's safe span without brackets
- Undermount sinks held only by adhesive, with no clips or rails
- Tops set on cabinets that are out of level or not fixed

**Controls that matter**

- Written overhang and support rules by material and thickness
- Mechanical sink mounts in addition to adhesive
- Signed template approval and a post-install inspection with photos

### Workers’ injury: Severe (5 of 5)

Engineered quartz is mostly crystalline silica; dry or poorly wetted cutting causes rapid silicosis in young workers, and falling slabs kill.

Covers: Injuries and illness to employees.

**Watch for**

- Dry edging, polishing or cutouts with handheld grinders
- Slurry left to dry on floors and then swept or blown
- No air monitoring, respirator fit tests or lung screening

**Controls that matter**

- Integrated water feed on every saw, router and polisher, with wet housekeeping
- Air monitoring, fit-tested respirators and regular lung health checks
- Vacuum lifters, slab clamps and A-frame carts with rated capacity

### Commercial auto: Elevated (3 of 5)

Box trucks and flatbeds with A-frames carry heavy, top-heavy loads of finished tops to job sites every day.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Tops carried on homemade frames or loose in van beds
- Installers with no experience driving loaded trucks

**Controls that matter**

- Engineered A-frames with straps and a pre-trip load check
- Driving record checks and telematics on installation trucks

### Crime and theft: Low (1 of 5)

Slabs are too heavy to steal casually and payments come by card or check; the exposure is deposits and tools.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- One person taking deposits, ordering slabs and keeping the books

**Controls that matter**

- Dual approval for refunds and for changes to supplier bank details

### Inland marine and equipment: Elevated (3 of 5)

Customer-selected slabs held for cutting, and finished tops in transit or at the site, break easily and cannot be matched.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Exotic or book-matched slabs bought by the customer and held in the shop
- Finished tops left at unsecured job sites before installation

**Controls that matter**

- Bailee and installation cover set to the most valuable slab job
- Condition photos when slabs arrive and before tops leave the shop

### Environmental: Moderate (2 of 5)

Saw slurry, silica fines and adhesive waste are the issues; discharge to drains or yards is the usual complaint.

Covers: Pollution on or from the site or the work.

**Watch for**

- Slurry washed to storm drains or dumped on open ground
- Settled sludge drying outdoors where dust blows to neighbors

**Controls that matter**

- Closed-loop water recycling with settling tanks and a filter press
- Sludge bagged wet and sent to an approved disposal site

### Cyber and data: Moderate (2 of 5)

Digital templates and CNC programs drive every job; ransomware halts cutting, but little sensitive customer data is held.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Saw controllers and template files on the office network with remote access
- Deposits requested by emailed invoice, open to payment diversion

**Controls that matter**

- Offline backups of templates and CNC programs
- Saw and office networks separated, with vendor remote access controlled

### Professional liability: Low (1 of 5)

No design or advice is sold separately; templating and seam layout errors mean remakes of the fabricator's own work.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Kitchen design drawings or material consulting sold as a separate service

**Controls that matter**

- Material suitability and care sheets signed by the customer at sale

### Umbrella and excess: Elevated (3 of 5)

A slab falling on a visitor, a loaded truck crash or a silicosis suit from a former worker can exceed primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Retail slab yards open to the public
- Heavy trucks running long routes to distant job sites
- Silicosis claims by former or temporary workers under employers liability

**Controls that matter**

- Public kept out of storage racks and loading areas
- Speed and route rules for loaded installation trucks

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Usually a metal or masonry industrial unit with a high bay, a crane or forklift slab yard and a showroom at the front, sometimes in older buildings with timber mezzanines.
- **Occupancy**: Wet cutting, routing and polishing of stone and quartz, with resin adhesives, acetone and sealers at benches, crated slabs on racks and wooden crating waste.
- **Protection**: Sprinklers or monitored detection where adhesives and crating build up, extinguishers at benches, solvent cabinets, bolted slab racks, and an alarm and cameras over the yard.
- **Exposure**: Outdoor slab yards sit against fences and neighbors; blown silica dust and slurry runoff draw complaints, and adjoining woodworking or plastics tenants add fire exposure.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What share of work is engineered quartz versus natural stone, solid surface or laminate?
- Are installations done by employees or subcontract crews, and do subcontractors carry their own insurance?
- How many installations a year, and what share is for production homebuilders versus homeowners?
- Do installers disconnect or reconnect plumbing, gas cooktops or electrical fixtures?
- Have any current or former workers been diagnosed with silicosis or other lung disease?
- What caused each recent claim, and what changed afterwards?

### Documents to request

- Loss runs for all lines for recent policy terms
- Silica exposure control plan and latest air monitoring results
- Respirator fit-test and medical surveillance records
- Standard installation contract, warranty and builder agreements
- Driver list with vehicle schedule

### On site: fabrication shop

- Which machines cut and polish, and does every one feed water at the cutting point?
- Is any edging, cutout or polishing done dry with handheld grinders?
- How is slurry cleaned up, and are floors kept wet rather than swept or blown?
- Where are adhesives, acetone and sealers stored, and how much is out at benches?
- Are wet handheld tools air-powered or on ground-fault protected circuits?

### On site: slab handling and storage

- Are racks engineered and fixed, and are slabs restrained against tipping?
- What lifting gear is used, and when were clamps, vacuum lifters and cranes last inspected?
- Can customers walk among the racks, and who escorts them?

### On site: installation and vehicles

- How are tops secured on trucks, and who checks the load before leaving?
- How many installers carry each top, and what carts or lifters do they use on stairs?
- How are overhangs supported and undermount sinks fixed?

### On site: people and records

- Who wears respirators, and are fit tests and lung checks current for each of them?
- What does the claims history show for lung disease, crush injuries and installation damage?

### Refer or decline if you find

- Dry cutting, grinding or polishing of engineered quartz
- Dust on surfaces and floors swept or blown with compressed air
- Slabs leaning against walls or on unrestrained racks
- Workers with diagnosed silicosis and no change in dust controls
- Installers reconnecting gas cooktops without a licensed fitter

Location

## How UrbanStat data helps.

Earthquake shaking topples racks of slabs in a chain, wind knocks over outdoor A-frames, and ground-floor shops with saws and controllers at floor level flood easily.

Earthquake · Flood · Wind

- Earthquake scores at the shop address show whether slab racks and CNC saws sit on ground that shakes hard, before setting property terms.
- Parcel and permit data give the building's construction date and permit history, a quick check for unpermitted mezzanines or newly added cutting bays.
- Results returned in seconds through the risk analysis API let earthquake and flood checks on small shops, often quoted without a visit, run inside the quoting workflow.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Earthquake · Flood · Wind

Public loss data · NAICS 327991

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**6.2** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Cut stone and stone product manufacturing

**6.2**

All private industry

**2.3**

1.2 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Cut stone and stone product manufacturing (NAICS 327991). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**28** fatal work injuries in 2024, most often from transportation incidents (11).

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Nonmetallic Mineral Product Manufacturing (NAICS 327), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**1,669** citations from 245 inspections; 60% were classed serious, willful or repeat.

- 1910.1053 Respirable crystalline silica **347**
- 1910.134 Respiratory protection **245**
- 1910.1200 Hazard communication **152**
- 1910.178 Powered industrial trucks **76**
- 1910.95 Occupational noise exposure **62**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Cut Stone and Stone Product Manufacturing (NAICS 327991). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**5** facilities reported toxic chemical releases totaling **23,069 pounds** on and off site.

- Styrene **23,069**
- Lead and lead compounds **0**

Chemicals released in the largest amounts, in pounds. 3 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Cut Stone and Stone Product Manufacturing (NAICS 327991). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Installation floater**: Finished tops are fragile until fixed, and breakage at the job site falls outside the shop's property cover.
- **Bailee customers' goods**: Customers often buy their own slabs from a distributor and leave them with the fabricator for cutting.
- **Equipment breakdown**: CNC saw and waterjet spindles, pumps and controllers fail without any fire and stop every order.
- **Employers liability limits**: Silicosis suits by former and temporary workers can surface years later and reach beyond statutory benefits.

## NAICS and SIC codes for countertop fabricators

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [327991](https://www.urbanstat.com/industry-risk-guides/naics/#naics-327991) | Cut Stone and Stone Product Manufacturing |
| NAICS 2022 | [238340](https://www.urbanstat.com/industry-risk-guides/naics/#naics-238340) | Tile and Terrazzo Contractors |
| NAICS 2022 | [326199](https://www.urbanstat.com/industry-risk-guides/naics/#naics-326199) | All Other Plastics Product Manufacturing |
| NAICS 2022 | [423320](https://www.urbanstat.com/industry-risk-guides/naics/#naics-423320) | Brick, Stone, and Related Construction Material Merchant Wholesalers |
| SIC 1987, primary | [3281](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3281) | Cut Stone and Stone Products |
| SIC 1987 | [1743](https://www.urbanstat.com/industry-risk-guides/sic/#sic-1743) | Terrazzo, Tile, Marble, and Mosaic Work |

**Related business types**

- [Tile and marble contractors NAICS 238340](https://www.urbanstat.com/industry-risk-guides/tile-and-marble-contractors-naics-238340/)
- [Monument makers and retailers NAICS 327991](https://www.urbanstat.com/industry-risk-guides/monument-makers-and-retailers-naics-327991/)
- [Kitchen remodeling contractors NAICS 236118](https://www.urbanstat.com/industry-risk-guides/kitchen-remodeling-contractors-naics-236118/)
- [Granite quarries NAICS 212311](https://www.urbanstat.com/industry-risk-guides/granite-quarries-naics-212311/)
- [Building material dealers and lumberyards NAICS 444180](https://www.urbanstat.com/industry-risk-guides/building-material-dealers-and-lumberyards-naics-444180/)
- [Compare Countertop fabricators with Tile and marble contractors](https://www.urbanstat.com/industry-risk-guides/compare/?a=countertop-fabricators-naics-327991&b=tile-and-marble-contractors-naics-238340)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/countertop-fabricators-naics-327991/

- Page: Countertop fabricators (NAICS 327991, SIC 3281): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/countertop-fabricators-naics-327991/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
