---
title: "Commercial heat treaters (NAICS 332811, SIC 3398): Industry Risk Guide"
description: "NAICS 332811 · SIC 3398. Commercial heat treaters harden, temper, anneal and case-harden other manufacturers' parts in atmosphere, vacuum and salt-bath…"
url: https://www.urbanstat.com/industry-risk-guides/commercial-heat-treaters-naics-332811/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Commercial heat treaters NAICS 332811 · SIC 3398

Commercial heat treaters harden, temper, anneal and case-harden other manufacturers' parts in atmosphere, vacuum and salt-bath furnaces, usually quenching in oil. Flammable furnace gases and large open oil tanks make fire the dominant hazard, and a wrong cycle silently ruins safety-critical parts.

[**NAICS 332811** Metal Heat Treating](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332811) · [**SIC 3398** Metal Heat Treating](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3398)

Manufacturing · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption High](#line-bi)
3. [Premises liability Low](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Low](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Elevated](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Property.** Hot loads plunge into large tanks of oil beside furnaces filled with hydrogen-rich gas; a stuck elevator starts a major fire.

Loss drivers

## Where losses come from.

1. Quench oil fires when a hot load hangs up or water gets into the tank
2. Explosions of flammable furnace atmospheres and violent eruptions from molten salt baths
3. Mis-treated parts that crack or wear out early in customers' products

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Commercial heat treaters, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Elevated, 3 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Vacuum furnaces with gas quench and low-pressure carburizing replace oil and salt in many plants, lowering fire load but concentrating value in costly equipment.
- Aerospace and medical customers demand electronic temperature records and audits, so data loss or a missed furnace survey can void a whole load.
- Rising energy costs push plants toward induction and electric furnaces, shifting the hazard from gas explosions toward power quality and outages.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Hot loads plunge into large tanks of oil beside furnaces filled with hydrogen-rich gas; a stuck elevator starts a major fire.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Integral quench furnaces without tested safety interlocks
- Water-cooled oil coolers that can leak into the quench tank
- Oil residue coating roof steel, ducts and exhaust hoods

**Controls that matter**

- Burner, atmosphere and purge safeguards tested by a combustion specialist
- Oil temperature, level and water-content checks with over-temperature cut-outs
- Fixed fire protection over quench tanks, with hoods and ducts cleaned

### Business interruption: High (4 of 5)

Furnaces are built to order and customer approvals attach to this site, so work moves to competitors and may not return.

Covers: How long and how costly a shutdown is.

**Watch for**

- One vacuum or large batch furnace carrying key contracts
- Aerospace or medical approvals tied to specific equipment
- Dependence on a single gas or electricity supply

**Controls that matter**

- Spare elements, fans, pumps and controls for critical furnaces
- Pre-qualified second site or reciprocal treater
- Furnace recipes and certification records backed up off site

### Premises liability: Low (1 of 5)

Industrial premises with only customers' drivers and auditors visiting.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Drivers entering the shop floor near hot baskets

**Controls that matter**

- Collections handled at a separate dock

### Products and completed work: High (4 of 5)

Treatment sets the strength of gears, fasteners, springs and landing gear; an error is invisible until parts fail.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Aerospace, vehicle safety, firearm or medical implant parts
- High-strength steels sensitive to embrittlement and cracking
- Certificates issued without hardness or metallurgical checks

**Controls that matter**

- Calibrated temperature instruments, furnace surveys and recorded cycle charts
- Hardness and case depth testing on every load
- Terms limiting liability to the cost of re-treatment

### Workers’ injury: Elevated (3 of 5)

Burns, strains from loading heavy baskets and fixtures, heat stress and exposure to oil smoke and furnace gases.

Covers: Injuries and illness to employees.

**Watch for**

- Manual loading and unloading of hot fixtures
- Damp or cold parts and fixtures lowered into molten salt
- Entry into furnaces or pits for maintenance

**Controls that matter**

- Charge cars, hoists and manipulators for loads
- Preheating of parts and tools before salt bath immersion
- Confined space, gas testing and lockout procedures

### Commercial auto: Moderate (2 of 5)

Many shops run a truck or two collecting and returning customers' parts on local routes.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Daily pickup routes with dense, heavy bins

**Controls that matter**

- Bins secured against shifting and drivers' records checked

### Crime and theft: Low (1 of 5)

Nothing in the shop is easy to resell, and no cash is handled.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Customers' high-value alloy parts left on an open dock

**Controls that matter**

- Controlled receiving area with signed transfers

### Inland marine and equipment: Elevated (3 of 5)

Every part in the building belongs to a customer, and a single furnace load of aerospace parts can be worth more than the furnace.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- No terms limiting liability for customers' parts
- Peak values of work on the floor unknown

**Controls that matter**

- Bailee cover set from tracked work-in-progress values
- Signed terms of business with a stated liability limit

### Environmental: Elevated (3 of 5)

Quench oils, spent salts including cyanide-bearing types, ammonia, cleaning solvents and oily wash water are all regulated.

Covers: Pollution on or from the site or the work.

**Watch for**

- Cyanide or barium salt baths
- Underground quench oil pits or tanks
- Vapor degreasing before or after treatment

**Controls that matter**

- Segregated storage and licensed disposal for incompatible salts
- Pit leak testing or double containment
- Aqueous washers with oil skimming

### Cyber and data: Elevated (3 of 5)

Furnace recipes, controllers and the temperature records customers require are networked; lost records can mean whole loads cannot be certified.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Furnace controllers reachable remotely by vendors or from the office network
- Electronic cycle records kept only on one local server

**Controls that matter**

- Segmented control network with logged, multi-factor vendor access
- Cycle charts and certificates backed up off site daily

### Professional liability: Elevated (3 of 5)

Metallurgists choose cycles and sign certificates that customers rely on, so a wrong process choice or false pass is a professional error.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- In-house metallurgical lab issuing hardness and failure analysis reports
- Treaters recommending processes when customer specifications are unclear

**Controls that matter**

- Written process approval signed by the customer before first run
- Calibrated lab equipment and peer review of failure reports

### Umbrella and excess: High (4 of 5)

A batch of brittle aerospace bolts or steering parts can cause fatal failures, and every part from that load is suspect.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Aerospace, vehicle safety or lifting parts as a large share of work

**Controls that matter**

- Limits set by the most severe end use, including aircraft products cover

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Single-story steel-framed buildings with high bays, crane runways and pits for quench tanks and deep furnaces, often older plants with roof steel coated in oil residue.
- **Occupancy**: Gas-fired and electric furnaces with flammable endothermic or hydrogen atmospheres, open oil quench tanks, molten salt baths, ammonia for nitriding and baskets of customers' parts.
- **Protection**: Tested burner and atmosphere safeguards, fixed suppression over quench tanks, over-temperature and water detection on oil, sprinklers in the building, and a monitored alarm.
- **Exposure**: Plants sit among the manufacturers they serve in industrial districts, and bulk nitrogen, hydrogen or ammonia tanks outside the building add an explosion source near neighbors.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What share of work is aerospace, vehicle safety, medical, firearm or tooling, and for how many customers?
- Do any furnaces run unattended at night or on weekends, and who monitors them?
- What terms of business limit liability for customers' parts and consequential loss?
- What is the highest value of customers' parts on site at one time?
- What caused recent fires, rejected loads or customer claims, and what changed afterwards?

### Documents to request

- Loss runs with fire and product claims described
- Combustion safeguard and furnace inspection reports
- Standard terms of business and customer quality agreements
- Furnace survey and instrument calibration records

### On site: work and customers

- Which processes are running today, and on what parts for which customers?
- Which customer approvals and audits apply, and what did the last audit find?
- How are customers' parts received, tagged and kept apart through each process?
- Is shot peening, brazing or cryogenic treatment also done, and where in the plant?

### On site: furnaces and quenching

- How many furnaces of each type are there, and how old are their safety controls?
- When were atmosphere, purge and burner safeguards last tested?
- How large are the quench tanks, and what fixed fire protection covers them?
- How is quench oil monitored for water, temperature and level?
- What is the emergency procedure for a load stuck over the quench?

### On site: quality

- How are furnace temperatures surveyed and instruments calibrated?
- What testing is done on each load before parts are released?

### On site: people and environment

- How are heavy baskets and fixtures loaded and moved?
- Which salts and chemicals are stored, and how are wastes disposed of?

### Refer or decline if you find

- Quench tanks with no fixed fire protection
- Furnace safety interlocks jumpered or untested
- No signed terms limiting liability for customers' parts
- Cyanide and nitrate salts stored together
- Certificates issued without testing each load

Location

## How UrbanStat data helps.

Quench tanks and furnace pits are below floor level; flood water in hot oil or molten salt causes eruptions and spreads contamination. Shaking can slosh oil tanks and rupture gas lines to furnaces.

Flood · Earthquake · Tornado · Wind

- Flood scores at the address show whether water could reach below-floor quench tanks and salt baths, where it causes eruptions and carries oil off site.
- Earthquake scores at the address indicate how exposed open oil tanks and furnace gas piping are to sloshing and rupture.
- Parcel and permit data give building age and permit history, a check on when furnaces, gas services and fire protection were last formally altered.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Earthquake · Tornado · Wind

Public loss data · NAICS 332811

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**3.3** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Metal heat treating

**3.3**

All private industry

**2.3**

1.8 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Metal heat treating (NAICS 332811). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**7** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Coating, Engraving, Heat Treating, and Allied Activities (NAICS 33281), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**91** citations from 23 inspections; 57% were classed serious, willful or repeat.

- 1910.134 Respiratory protection **8**
- 1910.212 General requirements for all machines **5**
- 1910.146 Permit-required confined spaces **5**
- 1910.28 Duty to have fall protection and falling object protection **4**
- 1910.215 Abrasive wheel machinery **4**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Metal Heat Treating (NAICS 332811). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**98** facilities reported toxic chemical releases totaling **692,021 pounds** on and off site.

- Barium and barium compounds **197,340**
- Ammonia **189,147**
- Nitrate compounds **97,861**

Chemicals released in the largest amounts, in pounds. 14 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Metal Heat Treating (NAICS 332811). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Vacuum pumps, furnace elements, fans and controls fail without fire, and replacement furnaces are built to order.
- **Bailee customers' goods**: Customers' parts damaged by fire, quench or a wrong cycle are claimed against the treater, often far above the fee.
- **Product recall**: A wrong cycle on a batch of safety parts leaves customers recalling assemblies, a cost general liability excludes.
- **Site pollution liability**: Spent salts, quench oil in pits and ammonia releases create cleanup claims that general liability excludes.
- **Utility service interruption**: Loss of gas, power or nitrogen supply ruins loads in process and stops furnaces that cannot restart quickly.

## NAICS and SIC codes for commercial heat treaters

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [332811](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332811) | Metal Heat Treating |
| SIC 1987, primary | [3398](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3398) | Metal Heat Treating |

**Related business types**

- [Hot-dip galvanizers NAICS 332812](https://www.urbanstat.com/industry-risk-guides/hot-dip-galvanizers-naics-332812/)
- [Electroplating and metal finishing shops NAICS 332813](https://www.urbanstat.com/industry-risk-guides/electroplating-and-metal-finishing-shops-naics-332813/)
- [Tool, die, mold and machine tool makers NAICS 333514](https://www.urbanstat.com/industry-risk-guides/tool-die-mold-and-machine-tool-makers-naics-333514/)
- [Gear, bearing and power transmission manufacturers NAICS 333612](https://www.urbanstat.com/industry-risk-guides/gear-bearing-and-power-transmission-manufacturers-naics-333612/)
- [Foundries NAICS 331511](https://www.urbanstat.com/industry-risk-guides/foundries-naics-331511/)
- [Compare Commercial heat treaters with Hot-dip galvanizers](https://www.urbanstat.com/industry-risk-guides/compare/?a=commercial-heat-treaters-naics-332811&b=hot-dip-galvanizers-naics-332812)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/commercial-heat-treaters-naics-332811/

- Page: Commercial heat treaters (NAICS 332811, SIC 3398): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/commercial-heat-treaters-naics-332811/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
