---
title: "Cement, lime and gypsum manufacturers (NAICS 327310, SIC 3241): Industry Risk Guide"
description: "NAICS 327310 · SIC 3241. Cement plants quarry limestone, burn it with clay or shale into clinker in a rotary kiln and grind the clinker with gypsum. Lime,…"
url: https://www.urbanstat.com/industry-risk-guides/cement-lime-and-gypsum-manufacturers-naics-327310/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Cement, lime and gypsum manufacturers NAICS 327310 · SIC 3241

Cement plants quarry limestone, burn it with clay or shale into clinker in a rotary kiln and grind the clinker with gypsum. Lime, gypsum board and processed mineral plants run similar kilns, calciners and mills. Solid fuels, huge rotating machinery, dust and heat meet in plants that depend on one kiln line.

[**NAICS 327310** Cement Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-327310) · [**SIC 3241** Cement, Hydraulic](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3241) · [**NAICS 327410** Lime Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-327410) · [**NAICS 327420** Gypsum Product Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-327420)

Manufacturing · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption High](#line-bi)
3. [Premises liability Elevated](#line-gl)
4. [Products and completed work Elevated](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Low](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental High](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Property.** Pulverized coal or coke, waste-derived fuels and long conveyor galleries bring fire and explosion into a plant of massive, costly machinery.

Loss drivers

## Where losses come from.

1. Coal mill and fuel silo fires or explosions, and conveyor belt fires
2. Breakdown of kiln, mill or gearbox components with replacement times measured in months
3. Burns, falls, entrapment and crush injuries during maintenance and clearing of blockages

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Cement, lime and gypsum manufacturers, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Elevated, 3 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: High, 4 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Plants burn more tires, plastics and refuse-derived fuel to cut fuel costs and carbon, which adds storage fires, permit conditions and emissions scrutiny.
- Lower-carbon blended cements using calcined clay, slag and limestone filler shift quality control toward variable raw materials and newer performance testing.
- Carbon capture pilots, kiln electrification and on-site solar bring new high-value equipment and unfamiliar hazards into plants built decades ago.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Pulverized coal or coke, waste-derived fuels and long conveyor galleries bring fire and explosion into a plant of massive, costly machinery.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Shredded tires, solvents or refuse-derived fuel stored and fed to the kiln
- Coal mill running with weak inerting or temperature monitoring
- Bulk facing-paper rolls at wallboard plants, and unprotected transformers and cable tunnels

**Controls that matter**

- Carbon monoxide and temperature monitoring with inerting on coal mills and silos
- Explosion venting on fuel dust collectors
- Fixed protection for transformers, conveyor galleries and paper roll storage

### Business interruption: High (4 of 5)

Everything passes through one kiln; a cracked shell, failed girth gear or mill drive halts clinker for a long period.

Covers: How long and how costly a shutdown is.

**Watch for**

- Single kiln line with no sister plant in reach
- No spare for mill gearbox, main motors or transformer
- Limited clinker stock on hand

**Controls that matter**

- Critical spares held or pooled with sister plants
- Vibration, oil and shell temperature monitoring with planned outages
- Arrangements to buy clinker or cement from other producers

### Premises liability: Elevated (3 of 5)

Quarry blasting, heavy truck traffic and dust carry the plant's effects well past the fence.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Housing or roads close to the blast area
- Dust deposits on neighbors' vehicles, crops and buildings
- Many contract haulers and outage contractors on site

**Controls that matter**

- Blast designs with vibration monitoring and exclusion zones
- Enclosed transfer points and paved, swept haul roads
- Contractor prequalification and site induction

### Products and completed work: Elevated (3 of 5)

One bad silo of cement or a run of faulty wallboard is built into many structures and homes before problems show.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Blended cements with fly ash or slag from variable sources
- Bulk deliveries released before strength results are known
- Fire-rated or synthetic-gypsum wallboard, and lime sold for water treatment or food

**Controls that matter**

- Continuous chemical analysis and retained samples for every shipment
- Silo and shipment traceability to production date
- Fire-rating and emissions testing of wallboard by an independent laboratory

### Workers’ injury: High (4 of 5)

Hot meal and clinker, confined silos and preheater blockages, high structures and moving conveyors produce severe injuries.

Covers: Injuries and illness to employees.

**Watch for**

- Clearing preheater or cooler blockages by hand
- Entry into silos, mills and kilns during outages
- Large numbers of temporary contractors at shutdowns

**Controls that matter**

- Remote blockage clearing with air cannons or water jets
- Permit systems for confined space, lockout and work at height
- Dust control and respiratory protection at grinding and packing

### Commercial auto: Elevated (3 of 5)

Bulk tankers and bag trucks leave daily, though many producers rely on contract carriers for most loads.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Own fleet of pneumatic tankers
- Quarry haul roads crossing public highways

**Controls that matter**

- Driver qualification files, telematics and rollover training for tanker drivers
- Signed crossings and washed wheels at site exits

### Crime and theft: Low (1 of 5)

Product is low in value for its weight; exposure is fuel, copper cable and weighbridge fraud.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Collusion at the weighbridge between drivers and dispatch staff

**Controls that matter**

- Automated ticketing reconciled to silo stock

### Inland marine and equipment: Elevated (3 of 5)

The quarry runs large loaders, drills and haul trucks, and cement moves by rail, barge or ship to terminals.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Mobile plant working below unstable faces
- Stock held at remote terminals and on water

**Controls that matter**

- On-board fire suppression on haul trucks and loaders
- Cargo and terminal stock declared by location

### Environmental: High (4 of 5)

Kiln stacks, kiln dust disposal, waste fuels and a working quarry make this a heavily permitted site with long-tail liabilities.

Covers: Pollution on or from the site or the work.

**Watch for**

- Hazardous waste burned as fuel
- Kiln dust landfilled on site
- Quarry dewatering affecting neighbors' wells

**Controls that matter**

- Continuous emission monitoring with baghouses kept in repair
- Lined, monitored disposal cells and diked fuel storage
- Funded quarry restoration plan

### Cyber and data: Elevated (3 of 5)

Kilns, mills and truck loading run on plant control and dispatch systems; ransomware stops clinker production and shipments together.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Control networks reachable from office systems or remote vendors
- Automated weighbridge and dispatch with no manual fallback

**Controls that matter**

- Segmented process networks with controlled vendor remote access
- Offline backups and a drilled manual dispatch procedure

### Professional liability: Low (1 of 5)

No advice is sold as a service; product and mix guidance to customers comes with the cement or lime.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Laboratory testing or technical services sold to outside customers

**Controls that matter**

- Written terms limiting liability for technical guidance

### Umbrella and excess: High (4 of 5)

A tanker crash, a quarry blast gone wrong or a preheater collapse during an outage full of contractors can exceed primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Blasting close to homes, schools or busy roads
- Large outage crews working at height around hot material

**Controls that matter**

- Blast exclusion zones with notice to neighbors
- Outage safety plans covering every contractor on site

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Tall steel and concrete preheater towers, silos and conveyor galleries around a long kiln line, with steel-clad mill and packing buildings and older wallboard halls with combustible roofs.
- **Occupancy**: Pulverized coal, petroleum coke and waste-derived fuels fed to kilns and calciners, hot clinker and quicklime, oil-lubricated mill gearboxes and hydraulics, and paper and board stock at wallboard lines.
- **Protection**: Inerted coal mills and fuel silos with carbon monoxide detection, explosion venting on dust collectors, fixed protection on transformers and cable tunnels, sprinklered paper storage, and a trained site fire team.
- **Exposure**: Plants usually sit beside their own quarry, often isolated, with blasting, haul roads and dust reaching nearby homes; river and port terminals add flood and surge.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- How many kiln or calciner lines run, and which products come off them: cement, lime, wallboard or ground minerals?
- Which waste-derived fuels are burned, under what permit, and who supplies and tests them?
- Is quarrying, blasting and hauling done in-house or by contractors, and on what indemnity terms?
- What share of output goes to a few large customers or contracts with supply guarantees?
- What fires, explosions, kiln failures or serious injuries have occurred, and what changed afterward?

### Documents to request

- Loss runs and incident investigations for recent policy terms
- Air emission permits and continuous monitoring summaries
- Coal mill and fuel silo inerting and inspection records
- Critical spares list and the last major kiln outage report
- Blast design records and vibration monitoring results

### On site: plant and fuels

- Where are waste fuels received, shredded and stored, and what fire protection covers those areas?
- How is hot clinker kept off rubber belts, and what detects a conveyor gallery fire?
- How are coal mills and fuel silos monitored and inerted?
- What protects transformers, hydraulic rooms and cable tunnels?
- Where are facing paper, bagged product and pallets stored relative to dryers and kilns?

### On site: machinery and continuity

- Which critical spares are held for kiln drives, mills, gearboxes and transformers?
- What condition monitoring is done, and when was the last major outage?
- How much clinker is stocked, and where could more be bought?

### On site: quarry and neighbors

- How close is the nearest housing, and how is blasting monitored?
- How are haul road berms, faces and benches kept stable where mobile equipment works?
- What dust or vibration complaints have been received recently?

### On site: people and environment

- How are blockages in the preheater, cooler and silos cleared?
- How are outage contractors selected, inducted and supervised?
- Are emission permits current, and where does kiln dust go?

### Refer or decline if you find

- Coal mill without carbon monoxide monitoring or inerting
- No spare or sourcing plan for main gearbox or transformer
- Waste fuels burned outside permit conditions
- Manual clearing of hot preheater blockages
- Facing paper stored unsprinklered beside wallboard dryers

Location

## How UrbanStat data helps.

Tall preheater towers, silos and a long rotating kiln are sensitive to shaking and wind. Quarry floors and low-lying raw material stores flood, and quarry faces can slip. Coastal terminals add storm surge.

Earthquake · Flood · Landslide · Wind · Storm surge

- Earthquake and wind scores at the address show how exposed tall preheater towers, silos and the kiln line are before large property and interruption limits are committed.
- Landslide and flood scores for the site help judge quarry face stability and the chance of water reaching low raw material stores and tunnels.
- Street-by-street exposure views show how much insured value sits at the plant, its quarry and nearby terminals, with alerts when the accumulation passes a set threshold.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Earthquake · Flood · Landslide · Wind

Public loss data · NAICS 327310

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**3.1** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Cement and concrete product manufacturing

**3.1**

All private industry

**2.3**

1.1 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Cement and concrete product manufacturing (NAICS 3273), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**24** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Cement and Concrete Product Manufacturing (NAICS 3273), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**37** citations from 9 inspections; 51% were classed serious, willful or repeat.

- 1910.146 Permit-required confined spaces **5**
- 1910.134 Respiratory protection **4**
- 1910.178 Powered industrial trucks **4**
- 1910.179 Overhead and gantry cranes **3**
- 1910.1200 Hazard communication **2**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Cement Manufacturing (NAICS 327310). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**108** facilities reported toxic chemical releases totaling **7.2 million pounds** on and off site.

- Ammonia **2.9M**
- Hydrogen cyanide **1.1M**
- Hydrochloric acid **830,770**

Chemicals released in the largest amounts, in pounds. 59 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Cement Manufacturing (NAICS 327310). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Equipment breakdown**: Kiln drives, girth gears, mill gearboxes and large transformers fail without fire and take months to replace.
- **Site pollution liability**: Kiln dust cells, waste fuels and quarry dewatering create gradual pollution claims that general liability excludes.
- **Contingent business interruption**: Plants rely on a few fuel, gypsum and power suppliers and on rail or barge links.
- **Ocean and inland cargo**: Clinker and bulk cement travel to distant terminals by ship, barge and rail, where the producer often carries the risk.
- **Product recall or rip-and-tear**: Off-specification cement or faulty wallboard forces tear-out of finished concrete and walls at many times the product's price.

## NAICS and SIC codes for cement, lime and gypsum manufacturers

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [327310](https://www.urbanstat.com/industry-risk-guides/naics/#naics-327310) | Cement Manufacturing |
| NAICS 2022 | [327410](https://www.urbanstat.com/industry-risk-guides/naics/#naics-327410) | Lime Manufacturing |
| NAICS 2022 | [327420](https://www.urbanstat.com/industry-risk-guides/naics/#naics-327420) | Gypsum Product Manufacturing |
| NAICS 2022 | [327992](https://www.urbanstat.com/industry-risk-guides/naics/#naics-327992) | Ground or Treated Mineral and Earth Manufacturing |
| SIC 1987, primary | [3241](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3241) | Cement, Hydraulic |
| SIC 1987 | [3274](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3274) | Lime |
| SIC 1987 | [3275](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3275) | Gypsum Products |
| SIC 1987 | [3295](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3295) | Minerals and Earths, Ground or Otherwise Treated |

**Related business types**

- [Ready-mixed concrete producers NAICS 327320](https://www.urbanstat.com/industry-risk-guides/ready-mixed-concrete-producers-naics-327320/)
- [Precast concrete product manufacturers NAICS 327390](https://www.urbanstat.com/industry-risk-guides/precast-concrete-product-manufacturers-naics-327390/)
- [Crushed stone quarries NAICS 212312](https://www.urbanstat.com/industry-risk-guides/crushed-stone-quarries-naics-212312/)
- [Industrial mineral mines NAICS 212390](https://www.urbanstat.com/industry-risk-guides/industrial-mineral-mines-naics-212390/)
- [Brick and structural clay product manufacturers NAICS 327120](https://www.urbanstat.com/industry-risk-guides/brick-and-structural-clay-product-manufacturers-naics-327120/)
- [Compare Cement, lime and gypsum manufacturers with Ready-mixed concrete producers](https://www.urbanstat.com/industry-risk-guides/compare/?a=cement-lime-and-gypsum-manufacturers-naics-327310&b=ready-mixed-concrete-producers-naics-327320)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/cement-lime-and-gypsum-manufacturers-naics-327310/

- Page: Cement, lime and gypsum manufacturers (NAICS 327310, SIC 3241): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/cement-lime-and-gypsum-manufacturers-naics-327310/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
