---
title: "Body armor manufacturers (NAICS 339113, SIC 3842): Industry Risk Guide"
description: "NAICS 339113 · SIC 3842. Body armor manufacturers cut and stitch layered aramid and polyethylene fabrics into soft vests and press ceramic or composite…"
url: https://www.urbanstat.com/industry-risk-guides/body-armor-manufacturers-naics-339113/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Body armor manufacturers NAICS 339113 · SIC 3842

Body armor manufacturers cut and stitch layered aramid and polyethylene fabrics into soft vests and press ceramic or composite plates for rifle protection, selling to police, military and security buyers. The product exists to stop bullets, so any failure is a death or serious injury claim.

[**NAICS 339113** Surgical Appliance and Supplies Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-339113) · [**SIC 3842** Orthopedic, Prosthetic, and Surgical Appliances and Supplies](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3842)

Manufacturing · Updated November 2026

Risk profile

1. [Property Elevated](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Low](#line-gl)
4. [Products and completed work Severe](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Low](#line-auto)
7. [Crime and theft Elevated](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Moderate](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess Severe](#line-umbrella)

**Products and completed work.** A vest or plate that lets a round through kills its wearer, and a material defect affects every unit in the lot.

Loss drivers

## Where losses come from.

1. Armor that fails to stop a rated threat because of material degradation or a production fault
2. Lot-wide recalls and replacement programs after a failed test or field incident
3. Theft or diversion of controlled finished goods and costly ballistic fabric

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Body armor manufacturers, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Elevated, 3 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Low, 1 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: Severe, 5 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Low, 1 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Moderate, 2 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Severe, 5 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Lighter polyethylene and hybrid ceramic plates are replacing heavier designs, but their performance depends on heat, age and handling, which raises testing demands.
- Revised performance standards and test protocols require recertification of existing models, adding cost and the risk that models fail newer tests.
- Online sales to civilians have grown, bringing buyers who store and wear armor poorly and wider debate over who may legally buy it.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Elevated (3 of 5)

Ballistic fabrics and polyethylene sheet are costly and combustible, and plate pressing adds heated presses, resins and ovens.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- High-value fiber rolls concentrated in one unsprinklered store room
- Hot presses and autoclaves running unattended overnight
- Indoor test range with unburned powder and lead dust accumulation

**Controls that matter**

- Sprinklers throughout, with fabric stock split between fire areas
- Temperature limits and interlocks on presses and curing ovens
- Range cleaning schedule with dedicated filtered ventilation

### Business interruption: Elevated (3 of 5)

Only a handful of mills make ballistic fiber, and each design must be recertified if materials or the site change.

Covers: How long and how costly a shutdown is.

**Watch for**

- Single-source fiber or ceramic tile supply
- Fixed-price government contracts with late-delivery penalties

**Controls that matter**

- Buffer stock of certified materials held at a second location
- Contract terms that allow for supply interruption

### Premises liability: Low (1 of 5)

Visitors are limited to buyers and auditors; live-fire demonstrations are the only unusual exposure.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Demonstrations or range days for customers and the press

**Controls that matter**

- Range safety officer and written rules for every live-fire event

### Products and completed work: Severe (5 of 5)

A vest or plate that lets a round through kills its wearer, and a material defect affects every unit in the lot.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Fibers known to lose strength with heat, moisture or age
- Protection levels claimed without current independent certification
- Direct sales to consumers with no fitting or care guidance

**Controls that matter**

- Lot-by-lot ballistic testing with retained samples and full traceability
- Stated service life, care instructions and a replacement program
- Fiber supplier agreements covering specification changes and indemnity

### Workers’ injury: Elevated (3 of 5)

Repetitive cutting and stitching of tough ballistic fabric, plus hot plate presses, ceramic dust and range lead and noise.

Covers: Injuries and illness to employees.

**Watch for**

- Manual loading of heavy plate molds into hot presses
- Lead and noise exposure for range staff

**Controls that matter**

- Hoists at presses and cut-resistant gloves at cutting tables
- Blood lead and hearing checks for range staff

### Commercial auto: Low (1 of 5)

Goods ship by carrier and staff rarely drive beyond sales visits.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Sales staff carrying demonstration armor in personal cars

**Controls that matter**

- Non-owned auto cover and driving record checks

### Crime and theft: Elevated (3 of 5)

Finished armor is restricted, sought after and easy to resell, and ballistic fabric carries a high price per roll.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- No reconciliation of fabric issued against vests produced
- Online orders shipped without buyer eligibility checks

**Controls that matter**

- Caged stock, serial numbering and logged access
- Buyer verification and export screening before release

### Inland marine and equipment: Moderate (2 of 5)

High-value shipments move to agencies and distributors, and samples travel to trade shows and test laboratories.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Export consignments and large single contract deliveries

**Controls that matter**

- Transit limits set to the largest single shipment

### Environmental: Moderate (2 of 5)

Resins, adhesives, solvent wipes and lead from the test range are the pollutants, all in small volumes.

Covers: Pollution on or from the site or the work.

**Watch for**

- Bullet trap waste and range filters disposed of as ordinary trash

**Controls that matter**

- Lead waste recycled through a licensed handler

### Cyber and data: Elevated (3 of 5)

Government buyers require protection of controlled design and test data, and ransomware can stop production and breach contract security terms.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Export-controlled technical data stored on shared or cloud drives
- Agency customer lists and officer sizing records held on file

**Controls that matter**

- Access controls and logging that meet government contract security terms
- Offline backups of designs, test records and production data

### Professional liability: Moderate (2 of 5)

Agencies rely on the maker's advice on threat levels, fitting and service life, and in-house test results support sales claims.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Testing services sold to other armor makers
- Threat assessments or protection recommendations given to agencies

**Controls that matter**

- Written scope and disclaimers on any test or advisory work
- Fitting by trained staff, with measurements recorded and signed

### Umbrella and excess: Severe (5 of 5)

An armor failure kills or maims its wearer, and a lot-wide defect can bring many claims from agencies at once.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Large agency contracts covering many officers with one design
- Sales to the public with little control over use

**Controls that matter**

- Lot traceability that limits any recall to affected units
- Contract terms capping liability and defining test acceptance

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Modern light industrial buildings of steel or masonry, often with a secure stock room, an enclosed test range and offices for contract administration.
- **Occupancy**: Cutting and stitching of aramid and polyethylene fabric, hot pressing and curing of plates with resins, and an indoor range with powder residue and lead dust.
- **Protection**: Full sprinklers with fabric stock split between fire areas, interlocked press and oven controls, a ventilated and cleaned range, and monitored intrusion alarms with access control.
- **Exposure**: Usually in industrial parks among other light manufacturers; perimeter fencing and lighting matter because finished armor and fabric attract targeted theft.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What are annual sales and unit volumes, and what share comes from the largest single contract?
- What share of sales goes to agencies, distributors, exporters and private buyers?
- Have materials, suppliers or production sites changed since each model was last certified?
- Does the insured export, and how are export licenses and buyer screening handled?
- Does the insured offer testing, fitting or advisory services to agencies or other makers?
- Has any model failed a test, been recalled or been linked to a field incident?

### Documents to request

- Loss runs for products, property and crime
- Current independent certification reports for each model
- Lot test records and retained sample logs
- Major supply contracts with warranty and indemnity terms

### On site: products and certification

- Which protection levels are made today, and do labels match each model's current certification?
- How is each production lot tested, and are samples retained?
- How are fiber rolls checked for lot, age and storage conditions before cutting?
- What service life is stated, and how are owners told when armor expires?

### On site: plant and security

- Where is ballistic fabric stored, and is the area sprinklered and locked?
- How are presses, ovens and autoclaves supervised when running?
- Is there an on-site test range, and how is it ventilated and cleaned?
- How are finished vests and plates accounted for from stitching to shipment?

### On site: records

- Can any unit be traced back to its fabric lot and operator?
- How are buyer eligibility checks recorded for online and direct orders?

### Refer or decline if you find

- Protection ratings advertised without current independent certification
- No lot traceability or retained test samples
- Armor relabeled, refurbished or sold past stated service life
- Materials changed after certification without retesting

Location

## How UrbanStat data helps.

Ballistic fabrics lose performance when wet, so flood or roof damage can condemn the whole stock, not only the soaked rolls. Restricted, resalable goods make neighborhood burglary rates a real factor.

Flood · Crime · Wind · Tornado

- Crime scores at the address inform security conditions for a plant holding restricted, easily resold armor and costly fabric rolls.
- Flood scores at the address show whether moisture-sensitive ballistic fabric stored at floor level is exposed before stock limits are set.
- Underwriting rules drawn as areas on the map are enforced automatically, so armor stock submitted from a district closed to theft-attractive goods is referred at once.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Crime · Wind · Tornado

Public loss data · NAICS 339113

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**1.9** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Surgical appliance and supplies manufacturing

**1.9**

All private industry

**2.3**

0.4 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Surgical appliance and supplies manufacturing (NAICS 339113). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**4** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Medical Equipment and Supplies Manufacturing (NAICS 33911), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**42** citations from 11 inspections; 48% were classed serious, willful or repeat.

- 1910.1200 Hazard communication **5**
- 1910.134 Respiratory protection **5**
- 1910.132 General requirements (personal protective equipment) **3**
- 1910.107 Spray finishing using flammable and combustible materials **3**
- 1910.1025 Lead **2**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Surgical Appliance and Supplies Manufacturing (NAICS 339113). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**40** facilities reported toxic chemical releases totaling **2.8 million pounds** on and off site.

- Ethylene glycol **2.6M**
- Toluene **40,796**
- Zinc compounds **28,120**

Chemicals released in the largest amounts, in pounds. 24 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Surgical Appliance and Supplies Manufacturing (NAICS 339113). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Product recall**: A failed lot test forces agencies to pull and replace vests or plates across many officers at once.
- **Equipment breakdown**: Hydraulic plate presses, autoclaves and cutting machines fail without fire and delay contract deliveries.
- **Export and ocean cargo**: Export consignments of high-value armor travel by sea and air to buyers abroad, often under strict delivery terms.

## NAICS and SIC codes for body armor manufacturers

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [339113](https://www.urbanstat.com/industry-risk-guides/naics/#naics-339113) | Surgical Appliance and Supplies Manufacturing |
| SIC 1987, primary | [3842](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3842) | Orthopedic, Prosthetic, and Surgical Appliances and Supplies |

**Related business types**

- [Apparel manufacturers NAICS 315250](https://www.urbanstat.com/industry-risk-guides/apparel-manufacturers-naics-315250/)
- [Firearm manufacturers NAICS 332994](https://www.urbanstat.com/industry-risk-guides/firearm-manufacturers-naics-332994/)
- [Yarn spinning and weaving mills NAICS 313110](https://www.urbanstat.com/industry-risk-guides/yarn-spinning-and-weaving-mills-naics-313110/)
- [Plastics molders and extruders NAICS 326199](https://www.urbanstat.com/industry-risk-guides/plastics-molders-and-extruders-naics-326199/)
- [Firearm stores NAICS 459110](https://www.urbanstat.com/industry-risk-guides/firearm-stores-naics-459110/)
- [Compare Body armor manufacturers with Apparel manufacturers](https://www.urbanstat.com/industry-risk-guides/compare/?a=body-armor-manufacturers-naics-339113&b=apparel-manufacturers-naics-315250)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/body-armor-manufacturers-naics-339113/

- Page: Body armor manufacturers (NAICS 339113, SIC 3842): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/body-armor-manufacturers-naics-339113/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
