---
title: "Ammunition manufacturers (NAICS 332992, SIC 3482): Industry Risk Guide"
description: "NAICS 332992 · SIC 3482. Ammunition manufacturers draw brass cases, form bullets and shot, make or buy primers and propellant, and load them into…"
url: https://www.urbanstat.com/industry-risk-guides/ammunition-manufacturers-naics-332992/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Ammunition manufacturers NAICS 332992 · SIC 3482

Ammunition manufacturers draw brass cases, form bullets and shot, make or buy primers and propellant, and load them into cartridges, shotgun shells or larger military rounds. Primary explosives and smokeless powder sit beside high-speed presses, so one ignition can destroy a building, and a defective lot is spread across many shooters.

[**NAICS 332992** Small Arms Ammunition Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332992) · [**SIC 3482** Small Arms Ammunition](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3482) · [**NAICS 332993** Ammunition (except Small Arms) Manufacturing](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332993)

Manufacturing · Updated November 2026

Risk profile

1. [Property Severe](#line-property)
2. [Business interruption High](#line-bi)
3. [Premises liability Elevated](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury High](#line-wc)
6. [Commercial auto Elevated](#line-auto)
7. [Crime and theft Elevated](#line-crime)
8. [Inland marine and equipment Elevated](#line-marine)
9. [Environmental High](#line-env)
10. [Cyber and data Elevated](#line-cyber)
11. [Professional liability Low](#line-prof)
12. [Umbrella and excess High](#line-umbrella)

**Property.** Primer compounds react to friction, impact and static, and propellant burns violently; one initiation can level a process building and spread.

Loss drivers

## Where losses come from.

1. Explosions and flash fires in primer mixing, powder handling, loading and magazine storage
2. Overcharged, undercharged or mixed rounds that burst guns and injure shooters and bystanders
3. Lead contamination of workers, wastewater and soil from cores, shot, primers and test firing

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Ammunition manufacturers, colored by its rating
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: Severe, 5 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: High, 4 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Elevated, 3 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: High, 4 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Elevated, 3 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Elevated, 3 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Elevated, 3 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: High, 4 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Elevated, 3 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Low, 1 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: High, 4 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Demand surges drive fast expansion with new lines, new buildings and newly hired operators, raising explosion and quality risk while experience is thin.
- Lead-free primers and copper or steel projectiles cut lead exposure but bring new compounds and processes with less safety history.
- Direct online sales add age verification duties and customer data, while defense buyers impose stricter data security on their contractors.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: Severe (5 of 5)

Primer compounds react to friction, impact and static, and propellant burns violently; one initiation can level a process building and spread.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Primer mixing or charging done in-house, especially inside the main plant
- Powder and primers held beyond posted limits or outside magazines
- Process buildings with no separation, barricades or posted quantity limits

**Controls that matter**

- Separated, barricaded process buildings with posted explosive and personnel limits
- Conductive floors, grounding, humidity control and non-sparking tools in explosive areas
- Fast-acting deluge over powder hoppers and primer lines

### Business interruption: High (4 of 5)

Loading lines and primer production are specialized and slow to replace, and an explosion brings investigations and license reviews before restart.

Covers: How long and how costly a shutdown is.

**Watch for**

- One primer line or powder supplier feeding every product
- Defense contracts with delivery penalties or sole-source status

**Controls that matter**

- Product lines split across separated buildings or sites
- Second sources qualified for propellant, primers and brass cups

### Premises liability: Elevated (3 of 5)

Few visitors come on site, but blast and fragments from an explosion, or rounds leaving an outdoor test range, can reach neighbors and roads.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Homes, roads or schools within the plant's separation distances
- Customer or media shooting days at the test range
- Outdoor test ranges without baffles or a backstop sized for the calibers fired

**Controls that matter**

- Separation distances to the boundary rechecked as neighbors build closer
- Enclosed test ranges with bullet traps and restricted access

### Products and completed work: High (4 of 5)

A double charge or wrong powder bursts a gun, a squib load lodges a bullet in the bore, and faults repeat across lots.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Remanufactured ammunition loaded into collected, once-fired cases
- Loading lines without automatic powder charge and bullet seating checks
- Military rounds, grenades or fuzes, where a malfunction kills crews

**Controls that matter**

- Automated charge weight and presence checks that reject every faulty round
- Lot numbers on every box, with pressure and velocity testing per lot
- A recall plan that reaches dealers and buyers by lot number

### Workers’ injury: High (4 of 5)

Explosions burn and maim, presses crush hands, and lead and noise exposure builds up across production and test firing.

Covers: Injuries and illness to employees.

**Watch for**

- Operators working beside presses without blast shields
- Primers or powder carried by hand between machines
- Poor ventilation and no lead monitoring in core and shot areas

**Controls that matter**

- Operator shields and remote controls on presses handling primers or powder
- Blood lead testing, hygiene rooms and no eating in production areas
- Hearing protection and ventilated, enclosed test ranges

### Commercial auto: Elevated (3 of 5)

Propellant, primers and finished ammunition move by road as hazardous materials, and some makers run their own trucks between plants and magazines.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Own trucks carrying explosives without placards or trained drivers
- Loaded trailers parked overnight outside secured areas

**Controls that matter**

- Drivers trained for hazardous materials, with placards and planned routes
- Loaded vehicles kept in secured, approved parking

### Crime and theft: Elevated (3 of 5)

Finished ammunition, primers and powder resell easily, especially during shortages, and any missing explosives must be reported and investigated.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Rejected rounds and scrap leaving with no count
- Pallets of finished goods left on open docks overnight

**Controls that matter**

- Finished goods and explosives inventory reconciled daily
- Alarmed magazines, cameras and screening of staff at exits

### Inland marine and equipment: Elevated (3 of 5)

Ammunition shipments attract cargo theft, and defense contractors hold government-owned tooling, components and test equipment in their care.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Government-furnished property with no agreed value or responsibility
- Loaded trailers left at carrier terminals or staging yards

**Controls that matter**

- Transit cover sized to a full truckload of ammunition
- Register of customer-owned property with values and responsibility agreed

### Environmental: High (4 of 5)

Lead cores and shot, primer residues, explosive-laden wastewater and open burning of waste powder contaminate soil, water and air.

Covers: Pollution on or from the site or the work.

**Watch for**

- Open burning or detonation of waste explosives on site
- Shot towers, outdoor test ranges or old disposal pits
- Explosive or lead residues in floor drains and sumps

**Controls that matter**

- Waste explosives destroyed in approved incinerators or by licensed contractors
- Wastewater from loading and primer areas treated before discharge
- Soil and groundwater sampling on older sites, with records kept

### Cyber and data: Elevated (3 of 5)

Defense contracts carry data security terms, loading lines are networked, and direct online sales hold buyers' age and identity details.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Controlled technical data on shared drives without access controls
- Online sales collecting copies of buyers' identity documents

**Controls that matter**

- Separate networks for production controls and defense data
- Multi-factor login and encryption for customer records

### Professional liability: Low (1 of 5)

Little advice is sold; outside ballistic testing and published reloading data are the main professional exposures.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Pressure or ballistic testing performed for other makers
- Reloading data published for handloaders who buy components

**Controls that matter**

- Written terms and calibration records for any outside testing
- Published load data verified by pressure testing before release

### Umbrella and excess: High (4 of 5)

An explosion that reaches neighbors, a crash carrying explosives or a defective lot that injures many shooters each threaten primary limits.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Neighbors or public roads inside the plant's separation distances

**Controls that matter**

- Limits sized to the worst plausible explosion and product event

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Campuses of small, widely spaced process buildings, earth-covered magazines and barricades on rural land, beside larger noncombustible buildings for case drawing, bullet making and packing.
- **Occupancy**: Primary explosives in primers, smokeless and black powder, high-speed loading presses, annealing furnaces, lead melting and casting, and test ranges firing live rounds.
- **Protection**: Deluge over powder and primer operations, conductive floors and grounding, posted quantity limits, separation distances, lightning protection, monitored alarms, and a fenced, guarded perimeter with cameras.
- **Exposure**: Grass and brush around remote buildings carry wildfire to magazines, and housing or roads that creep toward the boundary shrink the plant's safe separation distances.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What share of output is small arms, shotgun, large caliber and military ammunition?
- Are primers and propellant made on site or bought in, and from how many suppliers?
- What explosive quantities are licensed and stored, and in how many magazines?
- Have there been explosions, fires, recalls or product injury suits at any plant?
- Does the company sell directly online, and how is buyer age verified?
- What share of revenue comes from defense contracts, and what indemnities do they give?

### Documents to request

- Loss runs including product claims and incident reports
- Explosives licenses and a site plan with separation distances
- Process hazard analyses for primer and loading operations
- Lot testing procedures and any recall notices
- Driver list and hazardous materials training records

### On site: explosive operations

- Where are primers charged and powder handled, and how far apart are those buildings?
- Are the posted explosive and personnel limits being kept in each process building today?
- How are static, friction and spills controlled where primers and powder are handled?
- What detection and deluge protect powder hoppers and primer lines?

### On site: storage and security

- How much powder, primer and finished stock is in each magazine against its limit?
- How are magazines and finished goods alarmed, counted and reconciled?
- What separates magazines from grass, woods, roads and neighbors?

### On site: quality and product

- How are charge weight, bullet seating and primer presence checked on every round?
- How are lots numbered, tested and sampled for later investigation?

### On site: people and environment

- What shields and remote controls protect press operators from an initiation?
- How are lead exposure, blood testing and hygiene handled in core and shot areas?
- How are waste explosives, rejected rounds and lead residues disposed of?

### Refer or decline if you find

- Explosives stored outside licensed magazines or over posted limits
- An explosion or fatality with no documented investigation or changes
- Loading lines without automatic charge checks on every round
- Open burning of waste powder near the plant boundary
- Homes built inside the plant's separation distances

Location

## How UrbanStat data helps.

Plants sit on large rural sites where grass and brush fires can reach magazines. Tornado debris can strike explosive buildings, remote stores invite break-ins, and flood water ruins propellant and spreads lead residues.

Wildfire · Tornado · Crime · Flood

- Wildfire and crime scores at the address show how exposed remote magazines are to brush fire and break-ins before property and theft terms are set.
- Parcel and permit data give construction dates and permit history for buildings on the site, showing which process buildings and magazines were added recently.
- Live wildfire perimeters during an event show whether an insured ammunition plant or its magazines lie in the fire's path.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Wildfire · Tornado · Crime · Flood

Public loss data · NAICS 332992

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**3.2** recordable injuries and illnesses per 100 full-time workers, above the private-industry average of 2.3.

Small arms ammunition manufacturing

**3.2**

All private industry

**2.3**

0.9 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Small arms ammunition manufacturing (NAICS 332992). Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**6** fatal work injuries in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Other Fabricated Metal Product Manufacturing (NAICS 3329), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**23** citations from 8 inspections; 78% were classed serious, willful or repeat.

- 1910.119 Process safety management of highly hazardous chemicals **6**
- 1910.1025 Lead **5**
- 1910.147 The control of hazardous energy (lockout/tagout) **4**
- 1910.178 Powered industrial trucks **3**
- 1910.95 Occupational noise exposure **1**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Small Arms Ammunition Manufacturing (NAICS 332992). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**26** facilities reported toxic chemical releases totaling **1.2 million pounds** on and off site.

- Ethylene glycol **256,582**
- Copper and copper compounds **244,011**
- Nitrate compounds **127,918**

Chemicals released in the largest amounts, in pounds. 16 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Small Arms Ammunition Manufacturing (NAICS 332992). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Product recall**: A charge or primer defect forces recall of whole lots already sold through dealers and online.
- **Cargo**: Carriers limit their liability for hazardous cargo, and ammunition loads are a frequent theft target at terminals.
- **Contingent business interruption**: Propellant and primers come from very few producers, and an outage there stops every loading line.
- **Equipment breakdown**: Loading presses, annealers and primer machines are specialized, and a breakdown stops a lot partway through its run.

## NAICS and SIC codes for ammunition manufacturers

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [332992](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332992) | Small Arms Ammunition Manufacturing |
| NAICS 2022 | [332993](https://www.urbanstat.com/industry-risk-guides/naics/#naics-332993) | Ammunition (except Small Arms) Manufacturing |
| SIC 1987, primary | [3482](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3482) | Small Arms Ammunition |
| SIC 1987 | [3483](https://www.urbanstat.com/industry-risk-guides/sic/#sic-3483) | Ammunition, Except for Small Arms |

**Related business types**

- [Firearm manufacturers NAICS 332994](https://www.urbanstat.com/industry-risk-guides/firearm-manufacturers-naics-332994/)
- [Explosives manufacturers NAICS 325920](https://www.urbanstat.com/industry-risk-guides/explosives-manufacturers-naics-325920/)
- [Fireworks manufacturers and display operators NAICS 325998](https://www.urbanstat.com/industry-risk-guides/fireworks-manufacturers-and-display-operators-naics-325998/)
- [Shooting ranges NAICS 713990](https://www.urbanstat.com/industry-risk-guides/shooting-ranges-naics-713990/)
- [Firearm stores NAICS 459110](https://www.urbanstat.com/industry-risk-guides/firearm-stores-naics-459110/)
- [Compare Ammunition manufacturers with Firearm manufacturers](https://www.urbanstat.com/industry-risk-guides/compare/?a=ammunition-manufacturers-naics-332992&b=firearm-manufacturers-naics-332994)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/ammunition-manufacturers-naics-332992/

- Page: Ammunition manufacturers (NAICS 332992, SIC 3482): Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/ammunition-manufacturers-naics-332992/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
