---
title: "Adhesive and sealant manufacturers: Industry Risk Guide"
description: "Adhesive manufacturers blend polymers, resins, tackifiers, fillers and solvents or water into glues, sealants, hot melts and reactive systems for…"
url: https://www.urbanstat.com/industry-risk-guides/adhesive-and-sealant-manufacturers/
type: Industry risk guide: UrbanStat’s underwriting guide for one business type
publisher: UrbanStat
---

# Adhesive and sealant manufacturers

Adhesive manufacturers blend polymers, resins, tackifiers, fillers and solvents or water into glues, sealants, hot melts and reactive systems for construction, packaging, flooring, vehicles and consumers. Solvent and hot-oil processes drive fire losses, and a bond that lets go in service can mean ripping out a whole installation.

Manufacturing · NAICS 325520 · SIC 2891 · Updated November 2026

Risk profile

1. [Property High](#line-property)
2. [Business interruption Elevated](#line-bi)
3. [Premises liability Moderate](#line-gl)
4. [Products and completed work High](#line-products)
5. [Workers’ injury Elevated](#line-wc)
6. [Commercial auto Moderate](#line-auto)
7. [Crime and theft Low](#line-crime)
8. [Inland marine and equipment Moderate](#line-marine)
9. [Environmental Elevated](#line-env)
10. [Cyber and data Moderate](#line-cyber)
11. [Professional liability Moderate](#line-prof)
12. [Umbrella and excess Elevated](#line-umbrella)

**Property.** Rubber is dissolved in flammable solvent in churns, and hot melts are cooked in kettles heated by thermal oil.

Loss drivers

## Where losses come from.

1. Bond failures in flooring, roofing, glazing and assembly that require costly tear-out and replacement
2. Fires in solvent churns, hot-melt kettles and thermal oil heating systems
3. Solvent and isocyanate exposure to workers, and solvent releases to ground and air

How it compares Each line’s rating against the average for its NAICS sector, Manufacturing (178 business types), and for all 747.

- Adhesive and sealant manufacturers
- Sector average
- All business types

**Low** **Moderate** **Elevated** **High** **Severe**

1. Property Property Property: High, 4 of 5; sector average 3.7; all business types 2.9.
2. Business interruption Interruption Business interruption: Elevated, 3 of 5; sector average 3.5; all business types 2.7.
3. Premises liability Premises Premises liability: Moderate, 2 of 5; sector average 1.9; all business types 2.7.
4. Products and completed work Products Products and completed work: High, 4 of 5; sector average 3.4; all business types 2.6.
5. Workers’ injury Workers Workers’ injury: Elevated, 3 of 5; sector average 3.4; all business types 3.0.
6. Commercial auto Auto Commercial auto: Moderate, 2 of 5; sector average 2.3; all business types 2.5.
7. Crime and theft Crime Crime and theft: Low, 1 of 5; sector average 1.9; all business types 2.2.
8. Inland marine and equipment Marine Inland marine and equipment: Moderate, 2 of 5; sector average 2.6; all business types 2.6.
9. Environmental Environmental Environmental: Elevated, 3 of 5; sector average 2.8; all business types 2.3.
10. Cyber and data Cyber Cyber and data: Moderate, 2 of 5; sector average 2.7; all business types 2.7.
11. Professional liability Professional Professional liability: Moderate, 2 of 5; sector average 1.5; all business types 2.0.
12. Umbrella and excess Umbrella Umbrella and excess: Elevated, 3 of 5; sector average 3.6; all business types 3.6.

What’s changing

- Pressure to cut solvent emissions pushes the mix toward water-based, hot-melt and reactive products, lowering fire load but raising isocyanate sensitization and moisture-cure failures.
- Adhesives now replace rivets and welds in vehicle bodies, electric vehicle battery packs and electronics, so a bond failure can turn into a safety recall.
- Building owners ask for low-emission products and ingredient disclosures, and odor or indoor air complaints after flooring installs now lead to tear-out demands.

Line by line

## Twelve lines, rated.

Each line shows its rating and the reason for it; open a line for what to watch for and the controls that matter. Ratings are UrbanStat’s own editorial view of a typical business of this type, on a five-step scale. They are a starting point for questions, not a quote, a rate or a statistical measure.

### Property: High (4 of 5)

Rubber is dissolved in flammable solvent in churns, and hot melts are cooked in kettles heated by thermal oil.

Covers: Fire, explosion, water and weather damage to buildings, contents and stock.

**Watch for**

- Solvent-based contact cements or rubber cements in the product mix
- Thermal oil heaters and piping with leaks or no interlocks
- Reactive raw materials such as isocyanates and peroxides stored warm

**Controls that matter**

- Solvent mixing in a cutoff room with rated electrics and ventilation
- High-temperature limits and low-flow interlocks on thermal oil systems
- Bonding and grounding at every solvent transfer

### Business interruption: Elevated (3 of 5)

Mixers and kettles are replaceable within months, but customers qualify a specific formula and switch slowly back after an outage.

Covers: How long and how costly a shutdown is.

**Watch for**

- Products specified into automotive or aerospace assembly lines
- Key polymer or tackifier from one supplier

**Controls that matter**

- Qualified toll blender for principal products
- Raw material safety stock held in a separate building

### Premises liability: Moderate (2 of 5)

No public on site; the off-premises exposure is technical staff advising at customers' plants and job sites.

Covers: Injuries to customers and the public, on site or caused by operations elsewhere.

**Watch for**

- Field technicians supervising application on construction sites

**Controls that matter**

- Written scope for site visits and technical advice

### Products and completed work: High (4 of 5)

Adhesives are hidden inside floors, roofs, windows, vehicles and packages, so one bad batch or wrong recommendation spoils many finished installations.

Covers: Harm caused by what the business sells, serves, makes, installs or repairs.

**Watch for**

- Flooring, roofing and structural glazing adhesives
- Solvent-based consumer cements used in closed rooms near pilot lights
- Food packaging and medical adhesives with migration limits

**Controls that matter**

- Batch testing with retained samples and full lot traceability
- Written substrate and moisture limits on every data sheet
- Sales terms limiting liability, backed by documented technical advice

### Workers’ injury: Elevated (3 of 5)

Isocyanates and epoxies sensitize skin and lungs, solvents intoxicate, and hot melt at kettle temperature sticks to skin and burns deep.

Covers: Injuries and illness to employees.

**Watch for**

- Open charging of solvents and isocyanates
- Operators skimming or sampling hot-melt kettles by hand

**Controls that matter**

- Closed charging, local exhaust and air monitoring for isocyanates
- Heat-resistant gloves, sleeves and face shields at kettles
- Medical surveillance for sensitizer exposure

### Commercial auto: Moderate (2 of 5)

Distribution is mostly by common carrier, with sales and technical staff driving to customers.

Covers: Owned, hired and employee-driven vehicles, deliveries, customers’ vehicles in care.

**Watch for**

- Own trucks delivering flammable adhesives to job sites

**Controls that matter**

- Driver checks and hazardous goods training where own trucks are used

### Crime and theft: Low (1 of 5)

Drums and pails of adhesive are not theft targets, and sales are invoiced.

Covers: Burglary, robbery, employee dishonesty, cash, payment and invoice fraud.

**Watch for**

- Payment diversion fraud on supplier invoices

**Controls that matter**

- Call-back verification before any change to supplier bank details

### Inland marine and equipment: Moderate (2 of 5)

Goods in transit are heat and frost sensitive, and dispensing equipment is often lent to customers.

Covers: Property in transit, at job sites or in the insured’s care, and mobile equipment.

**Watch for**

- Applicators and bulk melt units placed at customers' plants

**Controls that matter**

- Loan agreements and a current schedule of equipment at customers

### Environmental: Elevated (3 of 5)

Solvent storage and washings are the main pollution source; water-based and hot-melt lines add little.

Covers: Pollution on or from the site or the work.

**Watch for**

- Underground solvent tanks or a history of chlorinated solvent use
- Latex and wash water discharged without pretreatment

**Controls that matter**

- Diked solvent storage with overfill protection
- Wash water settled and reused, solids sent to licensed disposal

### Cyber and data: Moderate (2 of 5)

Formulas, batch records and order entry run on business systems; production is batch work with mostly manual controls and little personal data.

Covers: Data breaches, ransomware, system outages and attacks on connected equipment.

**Watch for**

- Formulas and customer specifications held on one server with no offline copy
- Automated dispensing and reactor controls reachable from the office network

**Controls that matter**

- Offline backups of formulas, batch records and quality data
- Separate networks for plant controls and office systems

### Professional liability: Moderate (2 of 5)

Technical staff recommend products for specific substrates and conditions, and a wrong recommendation is blamed for bond failures across a project.

Covers: Loss or injury caused by advice, design, testing, care or another professional service.

**Watch for**

- Job-specific product selection or application advice given verbally
- Field technicians approving surface preparation at job sites

**Controls that matter**

- Written recommendations stating substrate, moisture and temperature limits
- Advice logged against the job and reviewed by a second chemist

### Umbrella and excess: Elevated (3 of 5)

Most losses are costly tear-out, but a failed structural glazing bond or a solvent cement fire in a home can cause serious injury.

Covers: How likely one liability event is to exhaust primary limits.

**Watch for**

- Structural glazing, facade and vehicle assembly adhesives
- Consumer solvent cements sold through retail chains

**Controls that matter**

- Sales terms that cap liability and exclude consequential losses
- Qualification testing kept on file for each structural application

Property picture

## Construction, occupancy, protection, exposure.

What a risk engineer expects to find at a typical site of this type, and what to compare a submission against.

- **Construction**: Single-story steel or masonry plants, often extended over the years, with mixing halls, kettle rooms, drum stores and finished goods sharing one roof.
- **Occupancy**: Rubber and resins dissolved in solvent churns, hot melts cooked in thermal-oil kettles, and isocyanates and peroxides that react if stored too warm.
- **Protection**: Sprinklers designed for flammable liquids in solvent areas, a cutoff mixing room with rated electrics, interlocked thermal oil heaters, and grounding at every transfer.
- **Exposure**: Plants sit in industrial parks beside other manufacturers; burning solvent runs into drains and yards, and drum stores near the fence line take heat from any neighboring fire.

Checklist

## What to ask and look for.

Start with the desk review before quoting, then walk the site. Tick questions off as you go; ticks are kept in this browser only.

### Before quoting: ask the broker or owner

- What share of sales is solvent-based, and what volume of flammable liquid is on site at peak?
- Which end markets and largest customers take most of the output, and under what supply terms?
- Does the company send technicians to job sites or customers' plants, and what do they do there?
- Are any products used in structural glazing, roofing membranes, vehicle assembly or medical devices?
- What bond failure, fire or chemical exposure claims have occurred, and what changed afterwards?

### Documents to request

- Loss runs for the current and prior policy terms
- Product list with safety data sheets for the main lines
- Standard sales terms, warranties and technical data sheets
- Thermal oil and sprinkler system inspection reports
- Hazardous waste manifests and air or discharge permits

### On site: process and fire protection

- Where are solvents stored and mixed, and how is that area cut off?
- How is solvent charged to churns and mixers, and are bonding clamps in use?
- What interlocks and inspections cover thermal oil heaters and kettles?
- How are isocyanates, peroxides and other reactive materials stored?
- What sprinkler design protects production and warehouse areas, and for which liquids?

### On site: quality and technical service

- How are batches tested and traced, and how long are samples kept?
- How are formula changes approved and passed on to customers who specified the old product?
- How do field technicians record substrate checks and surface preparation approvals made at job sites?

### On site: people and environment

- What air monitoring and health checks are in place for sensitizers?
- Where do wash water and waste solvent go?
- What underground tanks or known contamination exist on the site?

### Refer or decline if you find

- Solvent churns in the open production area of an unsprinklered building
- Thermal oil system with visible leaks or bypassed interlocks
- Flooring or structural adhesive claims recurring across several jobs
- No retained samples or batch records

Location

## How UrbanStat data helps.

Flood reaching solvent tanks, drum stores and bagged powders creates a spill and ruins stock. Heat-sensitive raw materials and reactive chemicals depend on power for cooling, so storm outages matter more than for most plants.

Flood · Hurricane · Wind

- Flood scores at the address show whether solvent tanks, drum storage and raw material warehouses at grade would be reached by water.
- Parcel and permit data supply construction date, building value and permit history, a quick test of whether the plant was extended beyond its original fire protection.
- Hurricane and wind scores for the site show the storm exposure of plants whose temperature-sensitive reactive stock depends on power for cooling.

[Request a Demo →](https://www.urbanstat.com/demo/) · [Risk Selection](https://www.urbanstat.com/products/risk-selection/)

Flood · Hurricane · Wind

Public loss data

## What the published numbers say.

Official statistics for the industry or property type closest to this business. They describe the industry as a whole, not any one insured.

Workers’ injury frequency

**2.4** recordable injuries and illnesses per 100 full-time workers, close to the private-industry average of 2.3.

Paint, coating, and adhesive manufacturing

**2.4**

All private industry

**2.3**

0.7 of these cases per 100 workers involved days away from work.

United States, 2024. Industry: Paint, coating, and adhesive manufacturing (NAICS 3255), the closest published group. Source: [U.S. Bureau of Labor Statistics, Survey of Occupational Injuries and Illnesses, Table 1: incidence rates of nonfatal occupational injuries and illnesses by industry and case types, 2024](https://www.bls.gov/web/osh/table-1-industry-rates-national.htm).

Workplace deaths

**1** fatal work injury in 2024.

Manufacturing

**2.4**

All workers

**3.3**

Deaths per 100,000 full-time equivalent workers, for the industry sector as a whole.

United States, private industry, 2024. Industry: Paint, Coating, and Adhesive Manufacturing (NAICS 3255), the closest published group. Source: [U.S. Bureau of Labor Statistics, Census of Fatal Occupational Injuries](https://www.bls.gov/iif/fatal-injuries-tables/fatal-occupational-injuries-table-a-1-2024.htm); [sector rates](https://www.bls.gov/charts/census-of-fatal-occupational-injuries/number-and-rate-of-fatal-work-injuries-by-industry.htm).

Most cited safety standards

**36** citations from 16 inspections; 64% were classed serious, willful or repeat.

- 1910.147 The control of hazardous energy (lockout/tagout) **8**
- 1910.178 Powered industrial trucks **4**
- 1910.106 Flammable liquids **3**
- 1910.22 General requirements (walking-working surfaces) **2**
- 1910.303 General (electrical) **2**

Standards cited most often in this industry, by number of citations.

United States, citations issued October 2024 to September 2025 (federal fiscal year 2025). Industry: Adhesive Manufacturing (NAICS 325520). Covers federal and state-plan inspections. A citation is one violation item; one inspection can produce several. Source: [U.S. Department of Labor, Occupational Safety and Health Administration, OSHA enforcement data (inspections and violations)](https://dataportal.dol.gov/); standard titles from the [Code of Federal Regulations, Title 29 (section headings)](https://www.ecfr.gov/current/title-29).

Fire frequency

**7,966** fires a year reported in industrial and manufacturing properties, causing about $810 million in direct property damage a year.

United States, 2020 to 2024, annual average. The group includes utility, defense, agriculture and mining properties. Source: [National Fire Protection Association, Structure Fires in Industrial and Manufacturing Properties](https://www.nfpa.org/education-and-research/research/nfpa-research/fire-statistical-reports/fires-in-us-industrial-or-manufacturing-properties).

Toxic chemical releases

**140** facilities reported toxic chemical releases totaling **1.9 million pounds** on and off site.

- Diisocyanates **858,489**
- Toluene **200,066**
- Dichloromethane **193,153**

Chemicals released in the largest amounts, in pounds. 62 of the facilities reported at least one chemical classed as a carcinogen.

United States, 2024. Industry: Adhesive Manufacturing (NAICS 325520). Covers facilities in listed industries with ten or more full-time employees that handle listed chemicals above set thresholds. Source: [U.S. Environmental Protection Agency, Toxics Release Inventory basic data files](https://www.epa.gov/toxics-release-inventory-tri-program/tri-basic-data-files-calendar-years-1987-present).

**Industry loss ratios by line** (2020 to 2024, the same table on every guide)

Loss ratios are published by line of insurance, not by business type. They show how each line has run for insurers as a whole, whatever the business insured.

| Published line | Closest line in this guide | 2020 | 2021 | 2022 | 2023 | 2024 |
| --- | --- | --- | --- | --- | --- | --- |
| Fire | Property | 63.2% | 67.3% | 62.4% | 45.5% | 40.9% |
| Commercial multiple peril | Property and liability sold as a package | 61.2% | 60.2% | 59.4% | 61.2% | 54.4% |
| Inland marine | Inland marine and equipment | 64.5% | 49.4% | 47.1% | 44.1% | 44.0% |
| Other liability | Premises liability, and most umbrella, professional (other than medical) and cyber cover | 65.1% | 58.8% | 61.0% | 63.7% | 71.2% |
| Products liability | Products and completed work | 48.2% | 52.2% | 46.0% | 57.5% | 60.3% |
| Workers’ compensation | Workers’ injury | 47.9% | 49.2% | 45.0% | 44.3% | 46.0% |
| Commercial auto liability | Commercial auto | 68.3% | 66.5% | 71.9% | 76.8% | 77.6% |
| Commercial auto physical damage | Commercial auto | 50.9% | 56.3% | 64.3% | 65.1% | 57.9% |

United States. Losses incurred as a percent of direct premiums earned, countrywide, before reinsurance and not including loss adjustment expense. Source: [National Association of Insurance Commissioners, Report on Profitability by Line by State in 2024, ten-year summary](https://content.naic.org/sites/default/files/publication-pbl-pb-profitability-line-state.pdf).

Coverages to raise

- **Product recall**: A bad batch built into floors, windows or vehicles must be traced and pulled from many customers at once.
- **Pollution legal liability**: Solvent tanks, drum stores and wash water leave soil and drain contamination that general liability excludes.
- **Equipment breakdown**: Thermal oil heaters, kettle agitators and mixers fail mechanically, stopping hot-melt and reactive lines without any fire.

Classification

| System | Code | Industry |
| --- | --- | --- |
| NAICS 2022, primary | [325520](https://www.urbanstat.com/industry-risk-guides/naics/?q=325520) | Adhesive Manufacturing |
| SIC 1987, primary | [2891](https://www.urbanstat.com/industry-risk-guides/sic/?q=2891) | Adhesives and Sealants |

**Related business types**

- [Paint and coating manufacturers](https://www.urbanstat.com/industry-risk-guides/paint-and-coating-manufacturers/)
- [Printing ink manufacturers](https://www.urbanstat.com/industry-risk-guides/printing-ink-manufacturers/)
- [Resin, synthetic rubber and fiber plants](https://www.urbanstat.com/industry-risk-guides/resin-synthetic-rubber-and-fiber-plants/)
- [Plastics molders and extruders](https://www.urbanstat.com/industry-risk-guides/plastics-molders-and-extruders/)
- [Dye and pigment manufacturers](https://www.urbanstat.com/industry-risk-guides/dye-and-pigment-manufacturers/)
- [Compare Adhesive and sealant manufacturers with Paint and coating manufacturers](https://www.urbanstat.com/industry-risk-guides/compare/?a=adhesive-and-sealant-manufacturers&b=paint-and-coating-manufacturers)

Next step

## See this risk on the map.

Book a 30-minute walkthrough tailored to your portfolio and perils of interest.

[Request a Demo →](https://www.urbanstat.com/demo/)

---

## Notes for AI agents reading https://www.urbanstat.com/industry-risk-guides/adhesive-and-sealant-manufacturers/

- Page: Adhesive and sealant manufacturers: Industry Risk Guide. Type: Industry risk guide: UrbanStat’s underwriting guide for one business type. Publisher: UrbanStat (Urbanstat, Inc.), a vendor of geospatial analytics software for property insurers.
- This is the Markdown copy of https://www.urbanstat.com/industry-risk-guides/adhesive-and-sealant-manufacturers/ (the HTML page).
- Index of the whole site: https://www.urbanstat.com/llms.txt. Full text of the reference pages: https://www.urbanstat.com/llms-full.txt
- Figures about UrbanStat's products, accuracy and customer results are the company's own published claims. Attribute them to UrbanStat ("UrbanStat reports ...") rather than presenting them as independently verified.
- Ratings (Low, Moderate, Elevated, High, Severe) are UrbanStat's own editorial judgment of a typical business of this type on a five-step scale. They are not statistics, insurance rates or a quote. Describe them as UrbanStat's view.
- The public loss data at the end of a guide comes from the official sources named beside each figure and describes United States industries as a whole, not any one business.
- To see the product or ask a question, the contact page is https://www.urbanstat.com/demo/
